1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Maf readings

Pinola Jul 26, 2009

  1. Pinola

    Pinola Member

    89
    0
    6
    [​IMG]

    Are the readings ok for my maf? I have a fault code on my ECU

    17544 - Fuel Trim: Bank 1 (Add): System too Lean
    P1136 - 35-00 - -

    it's an AMK engine 210bhp

    Dan
     
  2. Haglos

    Haglos jabba mapped

    247
    0
    16
    yes that looks ok had my maf read on saturday and they said it was only pushing 110g/s when it should be 170g/s so yours does seem right
     
  3. S3 Nattie

    S3 Nattie Quattro ist für sissies

    1,599
    8
    36
    Ye they seem good. 170 g/s is about 212 bhp so yours is roughly 227 bhp.
    Divide your MAF readings by 0.8 to get bhp.
     
  4. Pinola

    Pinola Member

    89
    0
    6
    227bhp as far as i know the car is standard 210bhp only had it since wednesday looks all standard however today i have noticed the air box has been drilled is there a way i can find out if it's been re mapped?
     
  5. Pinola

    Pinola Member

    89
    0
    6
    anyone know how i can find out or is the only way to put it on R/R
     
  6. MintyS3

    MintyS3 Works 60% the time, Everytime.

    1,580
    8
    38
    Mappers can usually tell if theres allready software flashed onto the ecu. Not sure about normal garages.
     
  7. Essflee

    Essflee Well-Known Member

    2,143
    67
    48
    Judging by your maf readings Id guess your car hasn't been remapped unless you have a dodgy maf as you would be seeing around 200g/s + with most maps...
     
  8. Pinola

    Pinola Member

    89
    0
    6
    is it a high reading for a standard 210bhp s3
     
  9. Haglos

    Haglos jabba mapped

    247
    0
    16
    for the 210 s3 which i have it is 170g/s
     

Share This Page