1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logs for AMK 2001 S3 Remap

Discussion in 'A3/S3 Forum (8L Chassis)' started by sideways steve, Feb 26, 2012.

  1. sideways steve
    Offline

    sideways steve Member

    Joined:
    Dec 20, 2011
    Messages:
    347
    Likes Received:
    5
    [Feb 26, 2012]
    Well I finally got round to flashing my remap file to my car yesterday and am fairly happy with the results for a first attempt however I think I do have an underlying issue somewhere and hopefully some of you may be able to help.

    The flash is a basic stage 1 tune with increased fuelling and boost. I am thinking initially the boost map needs altering a bit as it tails off considerably as the revs increase and I would personally like it to hold higher boost pressure further up the revs.

    My airflow readings are suggesting 222bhp which seems quite low for a remapped S3 with 3" down pipe and sports cat however compared to the stock map the car feels far more responsive and pulls much more smoothly. Is it possible that I'm just getting a bad reading from the MAF ?

    Logs are below, any input/comments welcome.


    [TABLE="width: 500"]





























































































































































































































































































































































































































































































































































































































































































































    Saturday
    25​
    February
    2012​
    17:37​






















    8N0 906 018 J


    1.8L R4/5VT 0004




























































    Group A:
    115






    Group B:
    031






    Group C:
    003










    Engine Speed
    Load
    Cmd Pressure
    Press @ Intercool


    O2S1 Voltage
    O2S2 Voltage
    Bin. Bits
    Bin. Bits


    Engine RPM
    Air Mass Flow
    Throttle Opening
    Ign. Timing


    TIME








    TIME








    TIME








    Marker
    STAMP
    /min
    %
    mbar
    mbar
    STAMP








    STAMP
    /min
    g/s
    %
    ∞ATDC


    0.42​
    1320​
    27.8​
    1000.0​
    1010.0​
    0.82​
    0.969​
    0.945​


    0.00​
    1320​
    4.17​
    4.7​
    27.8​


    1.63​
    1320​
    31.6​
    1000.0​
    1010.0​
    2.03​
    0.961​
    0.945​


    1.25​
    1320​
    8.17​
    6.7​
    24.8​


    2.85​
    1400​
    41.4​
    1000.0​
    1020.0​
    3.26​
    0.945​
    0.945​


    2.44​
    1360​
    11.36​
    9.0​
    25.5​


    4.06​
    1520​
    35.3​
    1000.0​
    1020.0​
    4.45​
    0.945​
    0.945​


    3.66​
    1480​
    11.11​
    8.2​
    27.8​


    5.27​
    1560​
    36.1​
    1000.0​
    1020.0​
    5.65​
    0.953​
    0.945​


    4.86​
    1560​
    10.75​
    8.2​
    28.5​


    6.44​
    1520​
    35.3​
    1000.0​
    1020.0​
    6.86​
    0.945​
    0.945​


    6.04​
    1560​
    10.67​
    8.2​
    28.5​


    7.68​
    1520​
    36.1​
    1000.0​
    1020.0​
    8.08​
    0.945​
    0.945​


    7.27​
    1520​
    10.61​
    8.2​
    28.5​


    8.88​
    1520​
    35.3​
    1000.0​
    1020.0​
    9.30​
    0.953​
    0.945​


    8.47​
    1520​
    10.64​
    8.2​
    28.5​


    10.09​
    1520​
    36.1​
    1000.0​
    1020.0​
    10.46​
    0.953​
    0.945​


    9.70​
    1520​
    10.75​
    8.2​
    28.5​


    11.29​
    1480​
    33.1​
    1000.0​
    1020.0​
    11.70​
    0.945​
    0.945​


    10.89​
    1520​
    9.75​
    7.5​
    29.3​


    12.48​
    1480​
    33.1​
    1000.0​
    1020.0​
    12.89​
    0.945​
    0.945​


    12.07​
    1480​
    9.58​
    7.5​
    29.3​


    13.72​
    1480​
    33.1​
    1000.0​
    1020.0​
    14.12​
    0.938​
    0.945​


    13.32​
    1480​
    9.69​
    7.5​
    29.3​


    14.91​
    1480​
    33.1​
    1000.0​
    1020.0​
    15.32​
    0.945​
    0.945​


    14.50​
    1480​
    9.61​
    7.5​
    29.3​


    16.11​
    1480​
    33.1​
    1000.0​
    1020.0​
    16.50​
    0.945​
    0.945​


    15.73​
    1480​
    9.69​
    7.5​
    29.3​


    17.33​
    1480​
    33.1​
    1000.0​
    1020.0​
    17.75​
    0.953​
    0.945​


    16.91​
    1480​
    9.67​
    7.5​
    29.3​


    18.53​
    1480​
    33.1​
    1000.0​
    1020.0​
    18.92​
    0.945​
    0.945​


    18.12​
    1480​
    9.61​
    7.5​
    29.3​


    19.76​
    1480​
    33.1​
    1000.0​
    1020.0​
    20.17​
    0.945​
    0.945​


    19.33​
    1480​
    9.75​
    7.5​
    29.3​


    20.94​
    1480​
    33.1​
    1000.0​
    1020.0​
    21.35​
    0.945​
    0.945​


    20.53​
    1480​
    9.72​
    7.5​
    29.3​


    22.15​
    1480​
    33.1​
    1000.0​
    1020.0​
    22.53​
    0.945​
    0.945​


    21.75​
    1480​
    9.39​
    7.5​
    29.3​


    23.35​
    1560​
    72.2​
    1620.0​
    1040.0​
    23.78​
    0.891​
    0.875​


    22.97​
    1520​
    12.14​
    12.5​
    29.3​


    24.57​
    1800​
    86.5​
    1950.0​
    1180.0​
    24.94​
    0.797​
    0.821​


    24.18​
    1720​
    28.33​
    78.4​
    14.3​


    25.79​
    2160​
    108.3​
    2500.0​
    1350.0​
    26.22​
    0.828​
    0.821​


    25.37​
    2040​
    40.42​
    86.7​
    12.8​


    27.01​
    2600​
    133.8​
    2380.0​
    1660.0​
    27.38​
    0.821​
    0.821​


    26.59​
    2440​
    61.69​
    93.3​
    13.5​


    28.18​
    3200​
    188.7​
    2310.0​
    2360.0​
    28.59​
    0.821​
    0.821​


    27.80​
    3000​
    103.81​
    99.6​
    4.5​


    29.40​
    3920​
    184.2​
    2320.0​
    2330.0​
    29.81​
    0.805​
    0.821​


    28.99​
    3680​
    132.89​
    100.0​
    5.3​


    30.62​
    4640​
    183.5​
    2350.0​
    2290.0​
    31.00​
    0.813​
    0.821​


    30.22​
    4400​
    157.08​
    100.0​
    9.0​


    31.83​
    5280​
    166.2​
    2180.0​
    2130.0​
    32.25​
    0.813​
    0.821​


    31.40​
    5080​
    164.86​
    100.0​
    15.0​


    33.01​
    5840​
    162.4​
    2080.0​
    2040.0​
    33.40​
    0.813​
    0.821​


    32.60​
    5680​
    178.17​
    100.0​
    16.5​


    34.22​
    6320​
    145.1​
    1980.0​
    1810.0​
    34.64​
    0.821​
    0.821​


    33.84​
    6160​
    172.89​
    100.0​
    21.0​


    35.43​
    6720​
    123.3​
    1890.0​
    1870.0​
    35.85​
    0.805​
    0.821​


    35.02​
    6600​
    166.64​
    100.0​
    24.8​


    36.66​
    5920​
    12.8​
    1000.0​
    1260.0​
    37.04​
    0.813​
    0.938​


    36.24​
    6800​
    50.11​
    15.3​
    2.3​


    37.86​
    5080​
    12.0​
    1000.0​
    1270.0​
    38.24​
    0.914​
    0.961​


    37.46​
    5160​
    76.28​
    31.4​
    19.5​


    39.05​
    4880​
    12.0​
    1000.0​
    1070.0​
    39.44​
    1.991​
    1.047​


    38.65​
    5000​
    11.61​
    8.2​
    6.0​


    40.25​
    4440​
    12.0​
    1000.0​
    1060.0​
    40.68​
    1.991​
    1.047​


    39.86​
    4600​
    11.00​
    7.8​
    5.3​


    [/TABLE]

    [TABLE="width: 500"]


























































































































































































































































































































































































    Saturday
    25​
    February
    2012​
    17:44​






















    8N0 906 018 J


    1.8L R4/5VT 0004




























































    Group A:
    115






    Group B:
    020






    Group C:
    031










    Engine Speed
    Load
    Cmd Pressure
    Press @ Intercool


    Cyl #1
    Cyl #2
    Cyl #3
    Cyl #4


    O2S1 Voltage
    O2S2 Voltage
    Bin. Bits
    Bin. Bits


    TIME








    TIME








    TIME








    Marker
    STAMP
    /min
    %
    mbar
    mbar
    STAMP
    CF
    CF
    CF
    CF
    STAMP










    0.01​
    1600​
    20.3​
    1000.0​
    1040.0​
    0.38​
    0.0​
    0.0​
    0.0​
    0.0​
    0.78​
    0.977​
    0.953​




    1.19​
    1800​
    60.2​
    1110.0​
    1040.0​
    1.60​
    0.0​
    0.0​
    0.0​
    0.0​
    2.02​
    0.953​
    0.969​




    2.41​
    2160​
    96.2​
    2430.0​
    1240.0​
    2.81​
    0.0​
    0.0​
    0.0​
    0.0​
    3.19​
    0.828​
    0.836​




    3.60​
    2600​
    123.3​
    2430.0​
    1550.0​
    4.01​
    0.0​
    0.0​
    0.0​
    0.0​
    4.40​
    0.805​
    0.821​




    4.79​
    3200​
    176.7​
    2370.0​
    2210.0​
    5.19​
    0.0​
    0.0​
    0.0​
    0.0​
    5.61​
    0.813​
    0.821​




    6.02​
    3960​
    190.2​
    2380.0​
    2420.0​
    6.44​
    0.0​
    0.0​
    0.0​
    0.0​
    6.81​
    0.813​
    0.821​




    7.22​
    4720​
    179.7​
    2360.0​
    2260.0​
    7.62​
    0.0​
    0.0​
    3.0​
    0.0​
    8.05​
    0.813​
    0.821​




    8.42​
    5360​
    163.2​
    2220.0​
    2140.0​
    8.82​
    0.0​
    0.0​
    3.0​
    0.0​
    9.21​
    0.805​
    0.821​




    9.65​
    5960​
    158.6​
    2100.0​
    1990.0​
    10.05​
    3.0​
    3.0​
    5.3​
    0.0​
    10.45​
    0.805​
    0.821​




    10.83​
    6440​
    145.1​
    1980.0​
    1940.0​
    11.24​
    3.0​
    3.0​
    5.3​
    3.0​
    11.65​
    0.813​
    0.821​




    12.06​
    6640​
    53.4​
    1010.0​
    2170.0​
    12.47​
    0.0​
    0.0​
    0.0​
    0.0​
    12.89​
    0.953​
    0.945​




    13.26​
    5160​
    85.0​
    1330.0​
    1320.0​
    13.69​
    0.0​
    0.0​
    5.3​
    3.8​
    14.06​
    0.828​
    0.992​




    14.46​
    4520​
    12.8​
    1010.0​
    1150.0​
    14.85​
    0.0​
    0.0​
    0.0​
    0.0​
    15.25​
    1.000​
    1.047​




    15.66​
    3960​
    12.0​
    1010.0​
    1060.0​
    16.06​
    0.0​
    0.0​
    0.0​
    0.0​
    16.48​
    1.991​
    1.047​




    16.87​
    3760​
    12.0​
    1010.0​
    1050.0​
    17.28​
    0.0​
    0.0​
    0.0​
    0.0​
    17.67​
    1.991​
    1.047​




    [/TABLE]
    #1
  2. Ads

    Ads

    [Dec 27, 2014]

  3. beachbuggy
    Offline

    beachbuggy Well-Known Member

    Joined:
    Jan 27, 2010
    Messages:
    1,790
    Likes Received:
    143
    [Feb 26, 2012]
    [​IMG]

    here's a picture of the load map.

    pretty shocking really! not suprising why theres problems at low rpm and high rpm tailing off
    #2
  4. beachbuggy
    Offline

    beachbuggy Well-Known Member

    Joined:
    Jan 27, 2010
    Messages:
    1,790
    Likes Received:
    143
    [Feb 26, 2012]
    [​IMG]

    Here's what it should be looking like and possibly tailing off a little more at the top rpm though
    #3
  5. s3schofield
    Offline

    s3schofield Member

    Joined:
    Sep 14, 2009
    Messages:
    129
    Likes Received:
    4
    [Feb 26, 2012]
    what is this software very interested ?
    #4
  6. beachbuggy
    Offline

    beachbuggy Well-Known Member

    Joined:
    Jan 27, 2010
    Messages:
    1,790
    Likes Received:
    143
    [Feb 26, 2012]
    Freeware tunerpro....
    #5
  7. Broken Byzan
    Offline

    Broken Byzan Photographic Moderator Staff Member Moderator VCDS Map User

    Joined:
    Apr 26, 2004
    Messages:
    12,778
    Likes Received:
    325
    [Feb 26, 2012]
    bloody thing never works for me Dan, but nice work. Thanks for helping the guys out
    #6
  8. sideways steve
    Offline

    sideways steve Member

    Joined:
    Dec 20, 2011
    Messages:
    347
    Likes Received:
    5
    [Feb 27, 2012]
    Dan,

    As per our previous conversations, I value your input :) Thanks for that !

    Its probably worth pointing out to people that trying out various map combinations like this is VERY risky and that I am fully aware that I am jeopardising my engine by carrying out these tests with home grown map files.

    But at the end of the day its a risk worth taking in my opinion and if the worst did come to the worst I would replace my engine if anything did go catastrophically wrong which hopefully it will not :)

    Its also nice to be able to post up actual log files of various different maps for people to see what goes on and what you should be looking for when you log your own car.
    #7
  9. badger5
    Online

    badger5 www.badger5.co.uk Site Sponsor

    Joined:
    May 28, 2004
    Messages:
    7,554
    Likes Received:
    793
    [Feb 27, 2012]
    have you got the xdf file and hardware/software numnber of the ecu it relates to you could send?
    interested to see how tuner pro shows its stuff if the definition file is a reliable one?
    #8
  10. beachbuggy
    Offline

    beachbuggy Well-Known Member

    Joined:
    Jan 27, 2010
    Messages:
    1,790
    Likes Received:
    143
    [Feb 27, 2012]
    Bill

    The xdf above is one I did for Steve last night. It's not complete by any means as I only spent a couple of hours on it to help Steve out. I just defined the Afr,load,timing maps.

    If you want to see a complete one ( well enough for stage3 ) , I've just finished one for the BAM 8l0906018cb which has pretty much everything needed. I can forward you that one.
    Last edited by a moderator: Feb 27, 2012
    #9
  11. sideways steve
    Offline

    sideways steve Member

    Joined:
    Dec 20, 2011
    Messages:
    347
    Likes Received:
    5
    [Feb 27, 2012]
    Well, I went to flash the revised map this evening but ended up not doing it because my mate got delayed at work and I need his driveway so I can hook up to a battery charger LOL ! Gutted ! But ill be trying again tomorrow night :)
    #10
  12. sideways steve
    Offline

    sideways steve Member

    Joined:
    Dec 20, 2011
    Messages:
    347
    Likes Received:
    5
    [Feb 28, 2012]
    Latest revision of the map flashed and logged below :)

    CF's are high so need to adjust the timing. Also I think I would like the demand boost value increased a bit so it holds steady instead of tailing off.

    This revision does feel smoother but still isn't quite there yet and is still showing pretty weak airflow readings.

    [TABLE="width: 500"]


























































































































































































































































































































































































    Tuesday
    28​
    February
    2012​
    18:35​






















    8N0 906 018 J


    1.8L R4/5VT 0004




























































    Group A:
    003






    Group B:
    031






    Group C:
    115










    Engine RPM
    Air Mass Flow
    Throttle Opening
    Ign. Timing


    O2S1 Voltage
    O2S2 Voltage
    Bin. Bits
    Bin. Bits


    Engine Speed
    Load
    Cmd Pressure
    Press @ Intercool


    TIME








    TIME








    TIME








    Marker
    STAMP
    /min
    g/s
    %
    ∞BTDC
    STAMP








    STAMP
    /min
    %
    mbar
    mbar


    0.37​
    1520​
    3.94​
    3.1​
    29.3​
    0.77​
    1.031​
    0.945​


    0.01​
    1560​
    12.8​
    990.0​
    990.0​


    1.58​
    1720​
    27.06​
    77.3​
    18.0​
    1.99​
    0.883​
    0.899​


    1.18​
    1600​
    71.4​
    1300.0​
    1000.0​


    2.79​
    2080​
    42.11​
    87.8​
    13.5​
    3.22​
    0.883​
    0.891​


    2.39​
    1960​
    90.2​
    1500.0​
    1170.0​


    4.01​
    2600​
    67.08​
    95.3​
    17.3​
    4.43​
    0.906​
    0.883​


    3.61​
    2400​
    118.8​
    2250.0​
    1430.0​


    5.21​
    3240​
    122.72​
    100.0​
    10.5​
    5.62​
    0.867​
    0.867​


    4.82​
    3000​
    163.9​
    2430.0​
    1980.0​


    6.42​
    4080​
    142.14​
    100.0​
    9.0​
    6.82​
    0.852​
    0.844​


    6.00​
    3800​
    188.0​
    2510.0​
    2360.0​


    7.64​
    4760​
    158.42​
    100.0​
    12.0​
    8.03​
    0.844​
    0.844​


    7.25​
    4560​
    178.9​
    2430.0​
    2290.0​


    8.85​
    5440​
    169.25​
    100.0​
    19.5​
    9.24​
    0.821​
    0.836​


    8.42​
    5240​
    166.2​
    2400.0​
    2080.0​


    10.04​
    6000​
    177.28​
    100.0​
    18.0​
    10.47​
    0.821​
    0.836​


    9.66​
    5840​
    159.4​
    2250.0​
    2000.0​


    11.26​
    6440​
    182.61​
    100.0​
    16.5​
    11.66​
    0.821​
    0.836​


    10.84​
    6280​
    146.6​
    2160.0​
    1940.0​


    12.46​
    6840​
    165.25​
    38.0​
    7.5​
    12.86​
    0.750​
    0.836​


    12.04​
    6720​
    140.6​
    2130.0​
    1980.0​


    13.70​
    5880​
    12.36​
    9.4​
    6.8​
    14.08​
    0.930​
    0.945​


    13.29​
    6560​
    12.8​
    990.0​
    1270.0​


    14.86​
    5200​
    8.03​
    6.3​
    6.0​
    15.29​
    0.821​
    0.953​


    14.46​
    5240​
    143.6​
    990.0​
    1780.0​


    16.10​
    4800​
    11.08​
    7.8​
    5.3​
    16.47​
    1.991​
    1.047​


    15.70​
    4960​
    12.0​
    990.0​
    1070.0​


    17.28​
    4400​
    10.28​
    7.5​
    4.5​
    17.68​
    1.991​
    1.047​


    16.87​
    4560​
    12.0​
    990.0​
    1040.0​


    [/TABLE]

    [TABLE="width: 500"]



















































































































































































































































































































































































































































































































































    Tuesday
    28​
    February
    2012​
    18:42​






















    8N0 906 018 J


    1.8L R4/5VT 0004




























































    Group A:
    003






    Group B:
    020






    Group C:
    115










    Engine RPM
    Air Mass Flow
    Throttle Opening
    Ign. Timing


    Cyl #1
    Cyl #2
    Cyl #3
    Cyl #4


    Engine Speed
    Load
    Cmd Pressure
    Press @ Intercool


    TIME








    TIME








    TIME








    Marker
    STAMP
    /min
    g/s
    %
    ∞BTDC
    STAMP
    CF
    CF
    CF
    CF
    STAMP
    /min
    %
    mbar
    mbar


    0.84​
    1600​
    16.14​
    12.5​
    22.5​
    0.00​
    0.0​
    0.0​
    0.0​
    0.0​
    0.43​
    1600​
    31.6​
    990.0​
    1000.0​


    2.03​
    1760​
    27.03​
    38.4​
    18.8​
    1.23​
    0.0​
    0.0​
    0.0​
    0.0​
    1.62​
    1680​
    66.9​
    1120.0​
    1020.0​


    3.21​
    2040​
    37.06​
    52.2​
    15.0​
    2.42​
    0.0​
    0.0​
    0.0​
    0.0​
    2.83​
    1920​
    85.7​
    1300.0​
    1150.0​


    4.45​
    2440​
    56.53​
    93.7​
    15.0​
    3.62​
    0.0​
    0.0​
    0.0​
    0.0​
    4.03​
    2320​
    105.3​
    2160.0​
    1330.0​


    5.63​
    3040​
    92.97​
    100.0​
    18.8​
    4.85​
    0.0​
    0.0​
    0.0​
    0.0​
    5.24​
    2800​
    132.3​
    2400.0​
    1680.0​


    6.89​
    3760​
    130.00​
    100.0​
    10.5​
    6.05​
    6.0​
    6.0​
    6.0​
    3.0​
    6.47​
    3520​
    182.7​
    2520.0​
    2340.0​


    8.06​
    4520​
    150.92​
    100.0​
    11.3​
    7.27​
    6.0​
    6.0​
    6.0​
    6.0​
    7.64​
    4280​
    179.7​
    2500.0​
    2320.0​


    9.26​
    5200​
    161.89​
    100.0​
    18.8​
    8.47​
    6.0​
    6.0​
    9.0​
    6.0​
    8.87​
    4960​
    167.7​
    2490.0​
    2180.0​


    10.49​
    5760​
    172.61​
    100.0​
    16.5​
    9.67​
    8.3​
    5.3​
    9.0​
    9.0​
    10.07​
    5560​
    160.2​
    2330.0​
    2020.0​


    11.69​
    6280​
    175.50​
    100.0​
    15.0​
    10.89​
    8.3​
    8.3​
    12.0​
    9.0​
    11.30​
    6120​
    164.7​
    2220.0​
    1920.0​


    12.90​
    6680​
    179.25​
    100.0​
    16.5​
    12.08​
    10.5​
    8.3​
    11.3​
    11.3​
    12.50​
    6560​
    143.6​
    2120.0​
    1950.0​


    14.10​
    6280​
    5.14​
    8.6​
    9.0​
    13.28​
    10.5​
    7.5​
    11.3​
    11.3​
    13.69​
    6840​
    84.2​
    1070.0​
    2040.0​


    15.31​
    5040​
    12.14​
    8.2​
    6.0​
    14.48​
    0.0​
    0.0​
    0.0​
    0.0​
    14.91​
    5080​
    12.0​
    990.0​
    1070.0​


    16.52​
    3920​
    9.72​
    7.5​
    3.0​
    15.69​
    0.0​
    0.0​
    0.0​
    0.0​
    16.09​
    4040​
    12.0​
    990.0​
    1040.0​


    44.26​
    4400​
    150.92​
    100.0​
    12.0​
    43.45​
    6.0​
    6.0​
    8.3​
    7.5​
    43.90​
    4160​
    182.7​
    2340.0​
    2320.0​


    45.48​
    5080​
    159.17​
    99.6​
    15.8​
    44.67​
    6.0​
    6.0​
    8.3​
    7.5​
    45.06​
    4880​
    171.4​
    2360.0​
    2160.0​


    46.67​
    5680​
    171.36​
    100.0​
    17.3​
    45.90​
    9.0​
    8.3​
    10.5​
    9.8​
    46.31​
    5480​
    162.4​
    2350.0​
    2040.0​


    47.89​
    6160​
    174.92​
    100.0​
    15.0​
    47.08​
    8.3​
    8.3​
    10.5​
    9.8​
    47.48​
    6000​
    152.6​
    2200.0​
    1980.0​


    49.08​
    4800​
    123.56​
    100.0​
    23.3​
    48.29​
    8.3​
    7.5​
    9.8​
    9.0​
    48.67​
    6200​
    17.3​
    990.0​
    1940.0​


    50.32​
    5160​
    163.25​
    100.0​
    15.8​
    49.49​
    4.5​
    3.8​
    6.0​
    5.3​
    49.92​
    5040​
    164.7​
    2290.0​
    2160.0​


    51.52​
    5440​
    166.72​
    100.0​
    12.8​
    50.73​
    10.5​
    9.8​
    12.0​
    11.3​
    51.11​
    5360​
    161.7​
    2200.0​
    2110.0​


    52.71​
    5240​
    8.78​
    6.3​
    6.0​
    51.92​
    9.8​
    12.0​
    12.0​
    11.3​
    52.31​
    5600​
    169.2​
    990.0​
    2070.0​


    53.92​
    3920​
    8.97​
    6.7​
    3.8​
    53.13​
    0.0​
    0.0​
    0.0​
    0.0​
    53.53​
    4080​
    12.8​
    990.0​
    1080.0​


    55.12​
    3480​
    8.28​
    6.7​
    3.0​
    54.34​
    0.0​
    0.0​
    0.0​
    0.0​
    54.72​
    3640​
    12.0​
    990.0​
    1020.0​


    [/TABLE]
    #11
  13. sideways steve
    Offline

    sideways steve Member

    Joined:
    Dec 20, 2011
    Messages:
    347
    Likes Received:
    5
    [Feb 28, 2012]
    CF's far better, still having some issues though :( Need to investigate deeper as its not making the power it should and I suspect the boost is the issue, my N75 duty seems quite high ?

    [TABLE="width: 500"]




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































    Tuesday
    28​
    February
    2012​
    20:36​






















    8N0 906 018 J


    1.8L R4/5VT 0004




























































    Group A:
    115






    Group B:
    031






    Group C:
    003










    Engine Speed
    Load
    Cmd Pressure
    Press @ Intercool


    O2S1 Voltage
    O2S2 Voltage
    Bin. Bits
    Bin. Bits


    Engine RPM
    Air Mass Flow
    Throttle Opening
    Ign. Timing


    TIME








    TIME








    TIME








    Marker
    STAMP
    /min
    %
    mbar
    mbar
    STAMP








    STAMP
    /min
    g/s
    %
    ∞BTDC


    0.01​
    1400​
    11.3​
    990.0​
    990.0​
    0.40​
    1.226​
    0.953​


    0.78​
    1360​
    5.33​
    5.5​
    29.3​


    1.18​
    1360​
    63.9​
    1200.0​
    980.0​
    1.61​
    0.945​
    0.922​


    2.00​
    1520​
    23.19​
    69.8​
    15.0​


    2.41​
    1600​
    78.2​
    1340.0​
    1090.0​
    2.82​
    0.875​
    0.899​


    3.23​
    1760​
    30.72​
    81.2​
    13.5​


    3.61​
    1880​
    91.7​
    1490.0​
    1220.0​
    4.01​
    0.891​
    0.899​


    4.42​
    2120​
    46.44​
    88.6​
    12.0​


    4.81​
    2280​
    117.3​
    2120.0​
    1450.0​
    5.21​
    0.899​
    0.891​


    5.64​
    2640​
    73.28​
    96.1​
    14.3​


    6.03​
    2840​
    154.1​
    2380.0​
    1910.0​
    6.44​
    0.875​
    0.883​


    6.83​
    3320​
    128.94​
    100.0​
    2.3​


    7.23​
    3600​
    191.7​
    2490.0​
    2500.0​
    7.64​
    0.844​
    0.860​


    8.07​
    4160​
    148.50​
    100.0​
    7.5​


    8.47​
    4400​
    185.0​
    2500.0​
    2330.0​
    8.85​
    0.860​
    0.844​


    9.24​
    4920​
    161.14​
    100.0​
    14.3​


    9.65​
    5160​
    167.7​
    2450.0​
    2140.0​
    10.07​
    0.844​
    0.836​


    10.45​
    5560​
    171.61​
    100.0​
    13.5​


    10.85​
    5760​
    159.4​
    2270.0​
    2000.0​
    11.24​
    0.836​
    0.836​


    11.65​
    6160​
    176.69​
    100.0​
    20.3​


    12.07​
    6320​
    148.1​
    2160.0​
    1900.0​
    12.48​
    0.821​
    0.836​


    12.87​
    6640​
    182.31​
    100.0​
    19.5​


    13.27​
    6760​
    145.1​
    2020.0​
    2030.0​
    13.68​
    0.766​
    0.836​


    14.11​
    6840​
    34.44​
    11.8​
    14.3​


    14.49​
    6120​
    13.5​
    990.0​
    1150.0​
    14.87​
    0.782​
    0.938​


    15.27​
    5200​
    67.56​
    18.8​
    30.8​


    15.68​
    5160​
    12.8​
    990.0​
    1170.0​
    16.10​
    0.852​
    0.953​


    16.48​
    4840​
    11.00​
    8.2​
    5.3​


    16.89​
    4200​
    12.0​
    990.0​
    1050.0​
    17.28​
    1.991​
    1.047​


    17.71​
    3640​
    8.39​
    7.1​
    3.8​


    18.09​
    3520​
    12.0​
    990.0​
    1010.0​
    18.50​
    1.991​
    1.047​


    18.91​
    3280​
    8.64​
    6.7​
    2.3​


    19.28​
    3200​
    12.8​
    990.0​
    1020.0​
    19.71​
    1.991​
    1.047​


    20.10​
    2840​
    7.28​
    5.9​
    1.5​


    20.52​
    2680​
    12.8​
    990.0​
    1020.0​
    20.90​
    1.991​
    1.047​


    21.31​
    2480​
    5.97​
    5.1​
    0.0​


    21.70​
    2440​
    12.8​
    990.0​
    1010.0​
    22.12​
    1.991​
    1.047​


    22.53​
    2400​
    5.83​
    4.7​
    0.8​


    22.93​
    2320​
    12.8​
    990.0​
    1010.0​
    23.31​
    1.991​
    1.047​


    23.72​
    1400​
    3.72​
    3.1​
    1.5​


    24.12​
    1840​
    12.0​
    990.0​
    1000.0​
    24.56​
    1.133​
    0.945​


    24.96​
    2000​
    5.06​
    4.3​
    3.8​


    25.33​
    1640​
    12.8​
    990.0​
    990.0​
    25.74​
    0.906​
    1.047​


    26.13​
    1400​
    2.94​
    2.7​
    7.5​


    26.55​
    1520​
    10.5​
    990.0​
    990.0​
    26.96​
    1.991​
    1.047​


    27.33​
    1520​
    3.61​
    3.5​
    6.8​


    27.74​
    1480​
    18.0​
    990.0​
    990.0​
    28.17​
    0.984​
    0.922​


    28.56​
    1600​
    24.56​
    74.5​
    15.8​


    28.97​
    1720​
    78.2​
    1380.0​
    1100.0​
    29.35​
    0.883​
    0.899​


    29.75​
    1920​
    35.72​
    84.7​
    15.0​


    30.15​
    2080​
    99.2​
    1660.0​
    1280.0​
    30.59​
    0.891​
    0.891​


    30.99​
    2360​
    58.67​
    92.2​
    13.5​


    31.40​
    2520​
    130.8​
    2310.0​
    1630.0​
    31.76​
    0.883​
    0.883​


    32.18​
    2960​
    101.97​
    99.6​
    3.0​


    32.57​
    3160​
    186.5​
    2430.0​
    2350.0​
    32.99​
    0.875​
    0.867​


    33.39​
    3720​
    140.11​
    100.0​
    5.3​


    33.77​
    3960​
    191.7​
    2520.0​
    2450.0​
    34.19​
    0.836​
    0.844​


    34.60​
    4480​
    156.14​
    100.0​
    8.3​


    35.01​
    4720​
    179.7​
    2490.0​
    2290.0​
    35.41​
    0.836​
    0.844​


    35.81​
    5200​
    164.17​
    100.0​
    11.3​


    36.20​
    5400​
    160.9​
    2390.0​
    2100.0​
    36.62​
    0.828​
    0.836​


    37.00​
    5760​
    176.39​
    100.0​
    15.0​


    37.41​
    5960​
    154.9​
    2220.0​
    2030.0​
    37.79​
    0.821​
    0.836​


    38.24​
    6320​
    178.17​
    100.0​
    19.5​


    38.63​
    6480​
    148.1​
    2140.0​
    1940.0​
    39.03​
    0.844​
    0.836​


    39.44​
    6800​
    181.47​
    98.8​
    14.3​


    39.83​
    6840​
    60.9​
    1050.0​
    1880.0​
    40.23​
    0.852​
    0.836​


    40.64​
    6800​
    32.58​
    10.6​
    4.5​


    41.06​
    6080​
    12.8​
    990.0​
    1150.0​
    41.45​
    0.805​
    0.922​


    41.84​
    5080​
    11.36​
    8.6​
    6.0​


    42.23​
    5000​
    12.0​
    990.0​
    1050.0​
    42.65​
    1.991​
    1.047​


    43.05​
    4800​
    11.56​
    8.6​
    5.3​


    43.43​
    4480​
    12.0​
    990.0​
    1040.0​
    43.83​
    1.991​
    1.047​


    44.22​
    3520​
    8.25​
    7.1​
    3.8​


    44.63​
    3400​
    12.8​
    990.0​
    1020.0​
    45.05​
    1.991​
    1.047​


    45.46​
    3280​
    8.22​
    6.7​
    2.3​


    45.86​
    3240​
    12.8​
    990.0​
    1020.0​
    46.25​
    1.367​
    0.945​


    46.66​
    3200​
    28.39​
    18.4​
    31.5​


    47.09​
    3160​
    48.9​
    990.0​
    1160.0​
    47.49​
    0.891​
    0.945​


    47.90​
    3120​
    6.92​
    5.9​
    2.3​


    48.25​
    3080​
    12.8​
    990.0​
    1040.0​
    48.66​
    1.991​
    1.047​


    49.08​
    3040​
    16.14​
    11.8​
    14.3​


    49.50​
    3000​
    32.3​
    990.0​
    1010.0​
    49.86​
    1.016​
    0.992​


    50.27​
    3040​
    54.17​
    30.2​
    27.8​


    50.68​
    3080​
    101.5​
    1440.0​
    1390.0​
    51.10​
    0.953​
    0.938​


    51.51​
    3160​
    84.81​
    100.0​
    15.8​


    51.90​
    3200​
    137.6​
    1810.0​
    1790.0​
    52.31​
    0.899​
    0.906​


    52.71​
    3280​
    77.36​
    100.0​
    18.0​


    53.12​
    3360​
    159.4​
    2470.0​
    1990.0​
    53.54​
    0.883​
    0.867​


    53.89​
    3520​
    136.86​
    100.0​
    3.0​


    54.29​
    3560​
    185.7​
    1840.0​
    2530.0​
    54.70​
    0.883​
    0.938​


    55.12​
    3520​
    5.22​
    5.5​
    3.0​


    55.51​
    3440​
    12.8​
    990.0​
    1100.0​
    55.91​
    1.991​
    1.047​


    56.32​
    3160​
    7.58​
    6.3​
    2.3​


    56.71​
    3040​
    12.8​
    990.0​
    1030.0​
    57.12​
    1.991​
    1.047​


    57.54​
    2920​
    7.61​
    5.9​
    1.5​


    57.95​
    2880​
    12.8​
    990.0​
    1020.0​
    58.32​
    1.991​
    1.047​


    58.73​
    2840​
    7.08​
    5.9​
    1.5​


    [/TABLE]

    [TABLE="width: 500"]





























































































































































































































































































































































































































































































































































































































































































































    Tuesday
    28​
    February
    2012​
    20:38​






















    8N0 906 018 J


    1.8L R4/5VT 0004




























































    Group A:
    118






    Group B:
    020






    Group C:
    003










    Engine Speed
    Intake Temp
    N75 Duty Cycle
    Press @ Intercool


    Cyl #1
    Cyl #2
    Cyl #3
    Cyl #4


    Engine RPM
    Air Mass Flow
    Throttle Opening
    Ign. Timing


    TIME








    TIME








    TIME








    Marker
    STAMP
    /min
    ∞C
    %
    mbar
    STAMP
    CF
    CF
    CF
    CF
    STAMP
    /min
    g/s
    %
    ∞BTDC


    0.34​
    2080​
    24.0​
    0.0​
    1000.0​
    0.74​
    0.0​
    0.0​
    0.0​
    0.0​
    1.15​
    2160​
    4.72​
    4.3​
    33.0​


    1.55​
    1960​
    24.0​
    0.0​
    1010.0​
    1.96​
    0.0​
    0.0​
    0.0​
    0.0​
    2.35​
    1520​
    11.03​
    9.8​
    27.8​


    2.75​
    1520​
    26.0​
    0.0​
    990.0​
    3.15​
    0.0​
    0.0​
    0.0​
    0.0​
    3.57​
    1640​
    23.61​
    75.7​
    15.8​


    3.99​
    1760​
    24.0​
    94.5​
    1100.0​
    4.40​
    0.0​
    0.0​
    0.0​
    0.0​
    4.78​
    2000​
    37.53​
    85.5​
    15.8​


    5.17​
    2120​
    23.0​
    94.5​
    1280.0​
    5.60​
    0.0​
    0.0​
    0.0​
    0.0​
    5.98​
    2440​
    60.31​
    93.7​
    14.3​


    6.39​
    2640​
    21.0​
    94.5​
    1640.0​
    6.79​
    0.0​
    0.0​
    0.0​
    0.0​
    7.18​
    3040​
    109.14​
    100.0​
    5.3​


    7.59​
    3280​
    22.0​
    91.8​
    2390.0​
    8.01​
    0.0​
    0.0​
    0.0​
    0.0​
    8.42​
    3800​
    138.75​
    100.0​
    8.3​


    8.83​
    4080​
    23.0​
    94.5​
    2430.0​
    9.20​
    0.0​
    0.0​
    0.0​
    0.0​
    9.63​
    4560​
    154.44​
    100.0​
    9.0​


    10.03​
    4800​
    24.0​
    94.5​
    2200.0​
    10.41​
    3.0​
    0.0​
    3.0​
    0.0​
    10.80​
    5200​
    163.94​
    100.0​
    15.0​


    11.20​
    5400​
    26.0​
    94.5​
    2080.0​
    11.62​
    3.0​
    0.0​
    3.0​
    0.0​
    12.03​
    5800​
    174.33​
    100.0​
    15.0​


    12.44​
    5960​
    28.0​
    94.5​
    2010.0​
    12.82​
    2.3​
    0.0​
    2.3​
    0.0​
    13.22​
    6280​
    176.39​
    100.0​
    21.8​


    13.62​
    6440​
    30.0​
    94.5​
    1910.0​
    14.04​
    1.5​
    3.0​
    8.3​
    6.0​
    14.44​
    6720​
    179.64​
    100.0​
    18.0​


    14.85​
    6840​
    33.0​
    0.0​
    2210.0​
    15.23​
    0.0​
    0.0​
    0.0​
    0.0​
    15.66​
    6000​
    11.31​
    9.4​
    6.8​


    16.04​
    5240​
    30.0​
    94.5​
    1130.0​
    16.46​
    3.0​
    6.0​
    6.0​
    4.5​
    16.84​
    5440​
    168.83​
    100.0​
    7.5​


    17.25​
    5560​
    33.0​
    94.5​
    2080.0​
    17.66​
    3.0​
    6.0​
    6.0​
    4.5​
    18.05​
    5720​
    174.92​
    100.0​
    13.5​


    18.46​
    5840​
    36.0​
    94.5​
    2040.0​
    18.88​
    2.3​
    5.3​
    5.3​
    3.8​
    19.28​
    6000​
    174.33​
    100.0​
    12.8​


    19.66​
    6080​
    37.0​
    94.5​
    2000.0​
    20.08​
    2.3​
    5.3​
    5.3​
    3.8​
    20.48​
    6240​
    177.28​
    100.0​
    10.5​


    20.90​
    6320​
    39.0​
    94.5​
    1990.0​
    21.29​
    8.3​
    4.5​
    4.5​
    9.8​
    21.66​
    5920​
    7.50​
    7.1​
    7.5​


    22.07​
    5320​
    35.0​
    0.0​
    1180.0​
    22.49​
    6.0​
    2.3​
    5.3​
    7.5​
    22.87​
    5120​
    162.31​
    100.0​
    5.3​


    23.27​
    5160​
    37.0​
    94.1​
    2160.0​
    23.68​
    9.0​
    5.3​
    5.3​
    7.5​
    24.10​
    5240​
    165.33​
    100.0​
    7.5​


    24.52​
    5320​
    39.0​
    94.5​
    2140.0​
    24.89​
    8.3​
    5.3​
    4.5​
    6.8​
    25.31​
    5360​
    166.14​
    100.0​
    7.5​


    25.69​
    5400​
    39.0​
    94.5​
    2120.0​
    26.09​
    8.3​
    4.5​
    4.5​
    6.8​
    26.51​
    5480​
    168.69​
    100.0​
    10.5​


    26.93​
    5520​
    39.0​
    94.5​
    2110.0​
    27.29​
    7.5​
    4.5​
    3.8​
    6.0​
    27.71​
    4880​
    7.14​
    6.7​
    5.3​


    28.11​
    4560​
    35.0​
    85.9​
    1110.0​
    28.53​
    5.3​
    1.5​
    4.5​
    3.8​
    28.92​
    4560​
    155.56​
    100.0​
    6.0​


    29.32​
    4600​
    38.0​
    93.7​
    2320.0​
    29.71​
    0.0​
    0.0​
    0.0​
    0.0​
    30.13​
    4520​
    5.50​
    7.1​
    5.3​


    30.54​
    4360​
    33.0​
    0.0​
    1100.0​
    30.95​
    0.0​
    0.0​
    0.0​
    0.0​
    31.35​
    4120​
    9.69​
    7.5​
    4.5​


    31.73​
    4000​
    33.0​
    0.0​
    1030.0​
    32.13​
    0.0​
    0.0​
    0.0​
    0.0​
    32.55​
    3800​
    9.03​
    7.5​
    3.8​


    32.93​
    3680​
    33.0​
    0.0​
    1010.0​
    33.32​
    0.0​
    0.0​
    0.0​
    0.0​
    33.73​
    3480​
    8.56​
    7.1​
    3.0​


    34.14​
    3400​
    33.0​
    0.0​
    1020.0​
    34.54​
    0.0​
    0.0​
    0.0​
    0.0​
    34.97​
    3200​
    8.39​
    6.7​
    2.3​


    35.35​
    3120​
    32.0​
    0.0​
    1020.0​
    35.76​
    0.0​
    0.0​
    0.0​
    0.0​
    36.13​
    3000​
    7.81​
    6.3​
    2.3​


    36.58​
    2960​
    32.0​
    0.0​
    1020.0​
    36.97​
    0.0​
    0.0​
    0.0​
    0.0​
    37.38​
    2880​
    7.00​
    6.3​
    1.5​


    37.76​
    2840​
    32.0​
    0.0​
    1000.0​
    38.18​
    0.0​
    0.0​
    0.0​
    0.0​
    38.58​
    2760​
    5.61​
    5.5​
    17.3​


    38.98​
    2720​
    30.0​
    0.0​
    1020.0​
    39.37​
    0.0​
    0.0​
    0.0​
    0.0​
    39.78​
    2640​
    6.33​
    5.5​
    0.8​


    40.16​
    2600​
    30.0​
    0.0​
    1010.0​
    40.57​
    0.0​
    0.0​
    0.0​
    0.0​
    40.99​
    2560​
    6.33​
    5.5​
    0.8​


    [/TABLE]
    #12
  14. Broken Byzan
    Offline

    Broken Byzan Photographic Moderator Staff Member Moderator VCDS Map User

    Joined:
    Apr 26, 2004
    Messages:
    12,778
    Likes Received:
    325
    [Feb 28, 2012]
    Well N75 is flat out maintataining the requested, which is mostly being given by the turbo, so at least the turbo is capable of it. I would say that requesting 2500 is a bit ambitous
    #13
  15. beachbuggy
    Offline

    beachbuggy Well-Known Member

    Joined:
    Jan 27, 2010
    Messages:
    1,790
    Likes Received:
    143
    [Feb 28, 2012]
    There was a mistake in the xdf....:) fixed....
    #14
  16. Chlippo
    Offline

    Chlippo Member

    Joined:
    Apr 17, 2010
    Messages:
    675
    Likes Received:
    13
    [Feb 28, 2012]
    Nice work here mates!

    Cant wait to do mine...
    #15
  17. sideways steve
    Offline

    sideways steve Member

    Joined:
    Dec 20, 2011
    Messages:
    347
    Likes Received:
    5
    [Feb 28, 2012]

    Yeh as dan said above there was a slight error in the definition. He has now sorted it and I will post up the new logs tomorrow once I have flashed it again :) Looking forward to trying it :)
    #16
  18. sideways steve
    Offline

    sideways steve Member

    Joined:
    Dec 20, 2011
    Messages:
    347
    Likes Received:
    5
    [Mar 1, 2012]
    I am back to running the map flased in the first post for now as I seem to have some boost issues that need further investigation. Once I am happy with the boost figures I will re flash the latest revision of this map and see what happens.
    #17
  19. superkarl
    Offline

    superkarl MAN OF STEEL

    Joined:
    Mar 28, 2010
    Messages:
    7,874
    Likes Received:
    1,304
    [Mar 1, 2012]
    some scary CF's :(

    your airflow on all your maps never seems to exceed 182. poorly maf maybe?
    or too early to tell without a finished map?
    #18
  20. sideways steve
    Offline

    sideways steve Member

    Joined:
    Dec 20, 2011
    Messages:
    347
    Likes Received:
    5
    [Mar 1, 2012]
    Yeh the map rvisions with the high CF's have now been relocated to another folder labelled DO NOT USE lol !

    I am starting to wonder if the MAF is faulty myself as it just wont show anything over 180 odds !

    When searching the forum the previous owner Nathan seemed to have a similar issue - http://www.audi-sport.net/vb/a3-s3-forum-8l-chassis/86479-help-vag-com-data-graphs.html

    I am wondering if this is all related.
    #19
  21. superkarl
    Offline

    superkarl MAN OF STEEL

    Joined:
    Mar 28, 2010
    Messages:
    7,874
    Likes Received:
    1,304
    [Mar 1, 2012]
    there isnt anything too serious in that thread. i cant see why nath was concerned about 0.8bar boost when thats what standard should be, and boost tailing off is normal.
    airflow for him is still a little low, and even for you playing around with maps, its not much better. that points to the maf imo. but then you need to finalise your map to see whats what then i suppose.
    #20
  22. sideways steve
    Offline

    sideways steve Member

    Joined:
    Dec 20, 2011
    Messages:
    347
    Likes Received:
    5
    [Mar 1, 2012]
    I was was more referring to the low airflow readings than anything else. The map I have on it just now gives the logs in the first post, Good CF's, boost seems not too bad and fuelling is spot on but we believe that the load map is not very good and could be why the airflow reading was so low.


    I am going to flash the stock map back on and check everything looks healthy on that before altering the modified maps any further I think. I am a firm believer in making sure the car is as it should be before trying to make changes otherwise you end up just chasing your tail !
    #21

Share This Page