1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Kufatec harness with oem bluetooth and rns-e

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by phil_w, May 8, 2011.

  1. phil_w
    Offline

    phil_w Member VCDS Map User

    Joined:
    Nov 2, 2008
    Messages:
    390
    Likes Received:
    13
    [May 8, 2011]
    Just bought KUFATEC GmbH & Co. KG - Kabelsatz Handyvorbeitung Audi - "Nur Bluetooth" Plug & Play 37881

    Stupidly i put the car back together without fully testing. Rns-e and oem bluetooth get on together ok and dial in and out. However bluetooth is not visible on vcds on channel 77 so i suspect its a k- line issue. I read about kufatec Cables either having k-line missing or swapped with telemute. Anyone got any experience with the 'plug and play harness' so i know exactly what i'm looking for when iremove the glovebox again?

    Cheers
    #1
  2. Ads

    Ads

    [Dec 26, 2014]

  3. phil_w
    Offline

    phil_w Member VCDS Map User

    Joined:
    Nov 2, 2008
    Messages:
    390
    Likes Received:
    13
    [May 8, 2011]
    Took it all apart again and lo and behold no k-line - so much for plug'n'play
    #2
  4. unikarl
    Offline

    unikarl Member

    Joined:
    Mar 19, 2004
    Messages:
    369
    Likes Received:
    2
    [May 9, 2011]
    Well at least you found the problem to be a simple one. Ive just installed rns to my car and wouldndt be too pleased if I'd have had to take it all back out again though!
    #3

Share This Page