1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Just got a new set or rims.........

AndyC Apr 1, 2011

  1. AndyC

    AndyC Moderator Moderator

    719
    6
    18
  2. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    ergo..... I have a set of std S4 rims for sale... with tyres..... rears have 4mm ish tread, fronts need replacing as nearly at TWI.
     
  3. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,605
    871
    113
    Do the S5 wheels have a 66mm or 57mm centre bore?
     
  4. Foxmeister

    Foxmeister Fired Up!

    1,785
    8
    38
    Sure they are the 66.1mm bore Kev, so will need spigot rings to fit older models.
     
  5. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,605
    871
    113
    ye that was my thaughts too.
     
  6. andybnwc

    andybnwc Member

    752
    0
    16
    they are dare wheels so just tell em its b5 s4 should be ok with fitting kit only problem may be clearance on that type of wheel with calipers
     
  7. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    yup, we collected from dare... they have spigot rings with them.... other than that no problems at all...
     
  8. Foxmeister

    Foxmeister Fired Up!

    1,785
    8
    38
    Pics fitted please, look a nice wheel!;)
     
  9. Blue_Thunder

    Blue_Thunder Well-Known Member

    1,776
    33
    48
    They are nice. Very nice.
     
  10. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    how do i post a pic??
     
  11. Oranoco

    Oranoco Well-Known Member

    3,998
    408
    83
  12. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    [​IMG]
     
  13. Oranoco

    Oranoco Well-Known Member

    3,998
    408
    83
    Nice looking wheels.
     
  14. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    yea, there is something missing however.....

    tinted windows.....
    calipers.......

    not sure..........
     
  15. Jason.s

    Jason.s Active Member

    2,879
    348
    38
    Lowness is missing :D lol
     
  16. Foxmeister

    Foxmeister Fired Up!

    1,785
    8
    38
    Spacers!!!!! Need to fill the arch that little bit more by the look of them!
     
  17. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    agree with both..

    trouble is its on eibach springs........ and I am NOT cutting..............

    10mm spacers I reakon... we were going for 10mm wider rear, but they werent is stock
     
  18. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,605
    871
    113
    Get the grinder out :p
     
  19. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    hahaha, SURE.................
     
  20. andybnwc

    andybnwc Member

    752
    0
    16
    spaced out may make it look like they are filling the arch more , are you very tall?
     
  21. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    not tall at all.... 5'9".............. WHY???
     
  22. andybnwc

    andybnwc Member

    752
    0
    16
    I was just looking at the headrests , they seemed to be very high
     
  23. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    they just line up with my head... :)
     
  24. Izzy1

    Izzy1 Vorsprung Durch Technik

    395
    10
    18
    A lot of people don't have their head rests lined up correctly. incase of an accident will most defo save you from a lot of neck pain.
     
  25. AndyC

    AndyC Moderator Moderator

    719
    6
    18
  26. N4THW

    N4THW Member

    250
    3
    18
    Tint it, slam it and spacers then it will be a donnnnnn of a car!
     
  27. AndyC

    AndyC Moderator Moderator

    719
    6
    18
    agreed,

    tints booked
    spacers ordered....

    trouble is i need ££ to lower it properally.....
     

Share This Page