1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

just a quicky people

s3gazz Nov 26, 2012

  1. s3gazz

    s3gazz Well-Known Member

    1,383
    105
    63
    can anyone recomend doin owt else before i torque the head up thanks.

    new water pump on damper, tenstioner, pistons in rods torqed up new oil pump an and pick up pipe sump on.
    water lines oil lines turbo and mani all bolted on to head.
     
  2. superkarl

    superkarl MAN OF STEEL

    9,595
    2,474
    113
    blow your load into the cylinder.
    aids lubrication
     
  3. Reesy

    Reesy Well-Known Member VCDS Map User

    3,640
    148
    63
    Head Gasket?
     
  4. Prawn

    Prawn My other car is a MINI!!!!

    11,640
    3,635
    113
    Cup of tea first I reckon Gaz
     
  5. Dani_B19

    Dani_B19 Audi-sports own special child.

    9,364
    399
    83
    N/a head gasket for extra cr?
     
  6. beachbuggy

    beachbuggy Well-Known Member

    1,931
    202
    63
    Unless you had the block sonically cleaned, blow the oil and water galleries with compressed air to ensure no **** or debris has got in
     
  7. s3gazz

    s3gazz Well-Known Member

    1,383
    105
    63
    Thanks guys Andrew did my head dan and cleaned it in the bath thingy lol head gasket on at min iv packed up for night and back on it Tomoz ill fill the cams he's up with oil when it's torqued up.

    need to wrap down pipe, put timing belt onto head cog, set timing, torque head down, get a tip and DV, seal sump, oil and water line to block, get a phenolic gasket, fill oil and coolant, sort cat out to fit Milltek and wrap my lambda sensor with somate as its ryt next to mani.

    dont no how Ro do trimming so need to get Someone that nose what there doin.

    or and fill turbo with oil first
     

Share This Page