1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Is it remapped?!

Discussion in 'A3/S3 Forum (8L Chassis)' started by DPM, Jun 28, 2006.

  1. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 28, 2006]
    :confused:

    I'm suppose to be going down to MRC a week today to get the S3 remapped but at the moment a lot of things are pointing in the way of the car already being remapped!

    The MAF gives a reading of 201gps when on the Vag.com

    The Eliminator DV needs the yellow spring or it dumps it's rear end off all the time

    The Audi tech thinks it's rapid for a S3

    :eek:
    #1
  2. Ads

    Ads

    [Dec 27, 2014]

  3. AL_B
    Offline

    AL_B Active Member

    Joined:
    Jan 6, 2003
    Messages:
    1,573
    Likes Received:
    0
    [Jun 28, 2006]
    Going off your MAF figure, then yeah it looks like it probably is remapped. Think the rule of thumb is anything over 200 gps is remapped. On my standard S3, it has a figure of 185 on a regular basis, with the occasional 189.

    The other rule of thumb is divide by 0.8 to get an approximate BHP figure. Yours works out to: 251 bhp.

    Like I say its approximate, and I have no idea about where this "divide by 0.8" rule of thumb comes from.

    MRC will probably be able to custom map it, so it produces more or perhaps smoother. They are supposed to be very good I believe.

    AL
    #2
  4. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 28, 2006]
    Don't want to drive 520 mile round trip though just to get it smoother... it's smooth enough and i want more power! :racer:
    Need to find out for definate before i make a wasted journey!
    #3
  5. dickys3
    Offline

    dickys3 Moderator Staff Member Moderator

    Joined:
    Oct 13, 2003
    Messages:
    2,955
    Likes Received:
    1
    [Jun 29, 2006]
    Log the boost using vagcom and see what its producing. If its about 1 bar peak then it will be standard. If its anything like 1.4, 1.5 etc then it will be chipped.

    As Al says, the MAF figures look a little high for a standard S3 so you may already be modified!

    Hope this helps
    #4
  6. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 29, 2006]
    12.30 it's on the Vag.com to see what it's boosting at... I'll let you all know!
    #5
  7. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 29, 2006]
    Still no further forward but we did find a boost leak!
    #6
  8. peteA3tdi
    Offline

    peteA3tdi Member

    Joined:
    Mar 10, 2004
    Messages:
    408
    Likes Received:
    0
    [Jun 29, 2006]
    can you hear the turbo screaming ? if yes its chiped
    #7
  9. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 29, 2006]
    Wouldn't say it was screaming!
    #8
  10. monkeytrousers
    Offline

    monkeytrousers Member

    Joined:
    Jul 18, 2004
    Messages:
    371
    Likes Received:
    0
    [Jun 29, 2006]
    Quite difficult to judge if you haven't heard it pre-remap! The turbo is definitely louder afterwards.
    #9
  11. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 29, 2006]
    It's wierd, the whole car was standard when i bought it. Had all the optional extras but everything else hadn't been touched. Just don't know as i havn't really drove any other S3's.
    #10
  12. dickys3
    Offline

    dickys3 Moderator Staff Member Moderator

    Joined:
    Oct 13, 2003
    Messages:
    2,955
    Likes Received:
    1
    [Jun 29, 2006]
    Whats the boost figures mate?
    #11
  13. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 29, 2006]
    Need to fix the leak first so i should have the figures tomorrow.
    #12
  14. Tallpaul
    Offline

    Tallpaul Member

    Joined:
    Jun 14, 2006
    Messages:
    835
    Likes Received:
    0
    [Jun 29, 2006]
    some 225 Leon Cupra R's have been known to flow 200g/s on a good day. Realistacly i believe that peak mass airflow overestimates power output by 10%. The conversion from g/s to bhp = g/s*1.31 which, if 10% over means your true bhp = 237. Not outside the realms of possibility without a remap. I'd say with REVO you should be getting 220g/s.

    Any chance your S3 was an Audi press car?
    #13
  15. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 29, 2006]
    Don't know, how would i find that out? It has all the optional extras on it!
    #14
  16. Tallpaul
    Offline

    Tallpaul Member

    Joined:
    Jun 14, 2006
    Messages:
    835
    Likes Received:
    0
    [Jun 29, 2006]
    You'd have to check the history of ownership...

    What year is it, was it owned by Audi UK for the first 3 months of it's life?

    Unless it's an early 1999 model or a just face-lifted one then it's unlikely. Just Audi like to spice up their press cars.

    If you are making 200g/s with a boost leak then it's kinda likely it's tuned in some way.
    #15
  17. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 30, 2006]
    No it's one of the very last ever made. The leak is quite big aswell so we'll have to see what happens when it's fixed!
    #16
  18. AL_B
    Offline

    AL_B Active Member

    Joined:
    Jan 6, 2003
    Messages:
    1,573
    Likes Received:
    0
    [Jun 30, 2006]
    DPM,

    Where was the boost leak, just out of interest?

    AL
    #17
  19. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 30, 2006]
    There's a Y piece under the manifold and it's leaking from there. It's also the same on my mates engine. Must be a common fault i'm thinking!
    #18
  20. nervus
    Offline

    nervus Well-Known Member

    Joined:
    Apr 6, 2004
    Messages:
    1,224
    Likes Received:
    59
    [Jun 30, 2006]
    @ DPM, I have the same dilemma. My car is 03 and came with all the extra's and was owned for its first 6 weeks by an Audi uk Director before me. Mine seems way quicker than 225TT's i've driven which I presumed would be v.similar! I've measured the boost though and it never goes above 13psi. It hammered my civic type-r also when ran back to back with my brother driving then swapping and letting me drive and everyone else says the two so similar in performance once on the move. It also has the legs on a friends focus RS. Maybe I just give it more though?

    Im from newcastle too, wanna meet up and compare performance etc??? You could also re-set my airbag light with Vagcom???:beerchug:
    #19
  21. AL_B
    Offline

    AL_B Active Member

    Joined:
    Jan 6, 2003
    Messages:
    1,573
    Likes Received:
    0
    [Jun 30, 2006]
    Cheers. I take it you mean the inlet manifold?

    Thats the problem with these engines, there's just a mass of vacuum pipes. Leaks are a nightmare to track down.

    AL
    #20
  22. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 30, 2006]
    @ nervus... yeah that would be a good idea. the vag.com is my mates though.
    #21
  23. dickys3
    Offline

    dickys3 Moderator Staff Member Moderator

    Joined:
    Oct 13, 2003
    Messages:
    2,955
    Likes Received:
    1
    [Jun 30, 2006]
    Any news yet on the boost DPM?
    #22
  24. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jun 30, 2006]
    Just got in and it's boosting at 1 bar peak, 1.1 max! I think it might just be a fast one off the production line but i'm not sure! :keule:
    #23
  25. Grant
    Offline

    Grant Well-Known Member VCDS Map User

    Joined:
    Dec 4, 2003
    Messages:
    1,161
    Likes Received:
    60
    [Jun 30, 2006]
    I'd say it was standard!
    #24
  26. solihul
    Offline

    solihul Member

    Joined:
    Mar 28, 2006
    Messages:
    60
    Likes Received:
    0
    [Jun 30, 2006]
    I'd say it was standard too
    #25
  27. dickys3
    Offline

    dickys3 Moderator Staff Member Moderator

    Joined:
    Oct 13, 2003
    Messages:
    2,955
    Likes Received:
    1
    [Jul 1, 2006]
    Yep Standard... Go for it then...

    Get it remapped and then really start having fun!
    #26
  28. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jul 1, 2006]
    Going down on Wednesday! :racer: Woohoo! Need engine oil and filter change, haldex oil and filter change and brake fluid change before i go though... It's going to be an expansive week! :(
    #27
  29. nervus
    Offline

    nervus Well-Known Member

    Joined:
    Apr 6, 2004
    Messages:
    1,224
    Likes Received:
    59
    [Jul 3, 2006]
    I've just found that my recently installed boost gauge has been leaking. Its boosting to 20psi (peak) and holding around 17 -18 so i guess mine is mapped I rekon but perhaps with not as much boost as other maps.

    Where are you going for the re-map DPM? Is there any 4WD RR's around here?
    #28
  30. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,446
    Likes Received:
    69
    [Jul 3, 2006]
    No, just heard good things about them!
    #29

Share This Page