1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Installing Alpine CDE-9850 Ri

Dibbler Jul 1, 2011

  1. Dibbler

    Dibbler New Member

    Hi all
    Just bought a 98 1.8 Avant se and didn't check the volume on the stereo,
    I have an Alpine CDE-9850 Ri does any one know which leads I need ?
    will I still get a display on the DIS ?
    any help greatly appreciated
  2. AndyMac

    AndyMac Moderator Staff Member Moderator

    You'll need a fascia adapter (to fill the gaps either side of the HU, an antenna amp adapter and either the PC9-404 rear amp adapter or just some speaker cable. The amp adapter feeds the rear RCA's from the Alpine to the rear amp, but you will have 2 x 50w going to the fronts from the Alpine and a puny 2 x 20w going to the rears from the Nokia rear amp. Far better (if you can be arsed) to simply rewire the rears directly to the Alpine
  3. Dibbler

    Dibbler New Member

    Thank you ,
    off to Halfrauds for an antenna amp ,lucky enough found facia adaptors in breakers :)

Share This Page