1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Induction Kit Part Required

Discussion in 'A4/S4 forum(B5 Chassis)' started by mattv6, Nov 29, 2008.

  1. mattv6

    mattv6 Member

    Joined:
    Oct 24, 2008
    Messages:
    82
    Likes Received:
    0
    I have tried installing an induction kit today on my 1999 2.4 V6 but it looks like I am missing the part that joints the cone to the MAF? If that is correct.

    Its just the plastic part with 4 hole for the screws one in each corner.

    I need to know the best place to get one of these from if you can purchase them on there own.

    Much appreciated.

    Matt
     
  2. Google AdSense Guest Advertisement



    to hide this advert.
  3. mattv6

    mattv6 Member

    Joined:
    Oct 24, 2008
    Messages:
    82
    Likes Received:
    0
  4. mattv6

    mattv6 Member

    Joined:
    Oct 24, 2008
    Messages:
    82
    Likes Received:
    0
    Anyone know the answer??
     
  5. Siena

    Siena Active Member

    Joined:
    Oct 28, 2007
    Messages:
    2,626
    Likes Received:
    5
    Matt, I think most folk don't subscribe to the induction kit route, hence the scarcity of replies.

    I for one don't sanction them - they make your car thirstier, and fuel consumption goes through the roof.

    Besides the noise, there are no real gains to be had. You're better off fitting a decent panel filter to your existing airbox.
     
  6. mattv6

    mattv6 Member

    Joined:
    Oct 24, 2008
    Messages:
    82
    Likes Received:
    0
    Ok mate cheers for the heads up.



    Matt
     

Share This Page