1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Identifying Thermostat in VCDS

Discussion in 'VCDS (formerly VAG-COM) forum' started by Avant4me, Dec 28, 2011.

  1. Avant4me

    Avant4me The're Graphite not black!!

    Mar 1, 2010
    Likes Received:
    Hi there, i am trying hard to identify a possible dicky thermostat as a cause for high fuel consumption. THere are numerous measuring blocks within VCDS which measure "Temperature".
    I know that the reading for the dash guage and the ecu are taken in different places. Anyone know specifically where the ECU takes its temp from and how i can read this in VCDS to check against dash guage.

    My engine is the AVF in an A4 1.9 TDI

    If it helps i am using the old 4.9 VAG Com software


  2. Advert Guest Advertisement

  3. pauldazzle

    pauldazzle Well-Known Member

    Nov 11, 2009
    Likes Received:
    Coolant Temp Sensor has 2 outputs, 1 to the dash gauge & the other to the ECU. So both get their signal from the CTS & not 2 different places!
    IIRC If you go into vagcom engine on measuring block 02 it should show you the temp the ECU is seeing. If the guage is showing a different temp to vagcom your temp sensor is bad.

Share This Page