1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I want it louder!! S3 replica

Discussion in 'A3/S3/Sportback (8P Chassis)' started by Kallum, Mar 18, 2013.

  1. Kallum

    Kallum Member

    Joined:
    Mar 6, 2013
    Messages:
    100
    Likes Received:
    0
    Just fit a cat back non res to my a3 2.0TFSI (milltek) and ye ok it's throaty through the gears, but I want raspy, more aggressive!! What do I do? Anyone suggest a large boredownpipe and decat or sport cat?! Also what about air intakes?? Help needed folks!!

    thanks
     
  2. Advert Guest Advertisement


  3. S3Alex

    S3Alex Rarely neutral
    Team Ibis Audi S3

    Joined:
    Dec 3, 2008
    Messages:
    9,793
    Likes Received:
    3,809
    You can always delete the backbox and just have a centre box.

    That's seriously loud and bordering on antisocial even to drive.

    Tried it....went back to the non resonated system.
     
  4. smurfworth

    smurfworth Well-Known Member
    Audi S3

    Joined:
    Feb 6, 2011
    Messages:
    1,855
    Likes Received:
    493
    Put in a screamer pipe?
     
  5. S3Alex

    S3Alex Rarely neutral
    Team Ibis Audi S3

    Joined:
    Dec 3, 2008
    Messages:
    9,793
    Likes Received:
    3,809
    That means a new turbo plus external waste gate system.
     
  6. smurfworth

    smurfworth Well-Known Member
    Audi S3

    Joined:
    Feb 6, 2011
    Messages:
    1,855
    Likes Received:
    493
    May as well go balls out if you want to be antisocial haha. Seriously though the milltek will take a bit of time to bed in
     
  7. S3Alex

    S3Alex Rarely neutral
    Team Ibis Audi S3

    Joined:
    Dec 3, 2008
    Messages:
    9,793
    Likes Received:
    3,809
    Never really noticed that with mine and it was a bit of an experiment deleting the backbox and keeping just a centre.

    I wouldn't recommend it overall as its very noisy and drones at around 2500-3500 rpm.

    You'd have a LOT of work and cost involved in screamer pipes and I think most wouldn't bother.
     
  8. Jonse

    Jonse Active Member

    Joined:
    Oct 28, 2012
    Messages:
    447
    Likes Received:
    48
    Would adding the milltek downpipe increase the noise?
     
  9. S3Alex

    S3Alex Rarely neutral
    Team Ibis Audi S3

    Joined:
    Dec 3, 2008
    Messages:
    9,793
    Likes Received:
    3,809
    Not really.
    And a decat won't either to be honest.

    I'd suggest being really sure you want to do this as its fun for a while and then gets pretty intrusive.

    I'd rather have something to improve performance.
     
  10. TDI140

    TDI140 Well-Known Member

    Joined:
    May 19, 2011
    Messages:
    1,623
    Likes Received:
    174
    At least a 3" Turbo back and then back box delete with what ever tail pipes you want to have which should give you a loud car and you will hear the turbo spool up much louder aswel which is a nice feeling lol
     
  11. Fanboy

    Fanboy An Audi Fanboy

    Joined:
    Apr 21, 2012
    Messages:
    518
    Likes Received:
    30
    I was about to do my miltek non-res exhaust but wasn't sure if I should be remapping the car to stage 2 straight on...

    I think its worth doing remap to stage 2 as requires all the hardware changes incl exhust.... which to me means more quality exhuast sound/noise rather than one of those cheap ones on VW Polo which you most of the time down the road...

    What do you guys think...?!?
     
  12. DJ-S3

    DJ-S3 Active Member

    Joined:
    Apr 23, 2009
    Messages:
    691
    Likes Received:
    43
    Mine certainly got louder....
     

Share This Page