1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to remove front door

voteforpedro Jul 10, 2010

  1. voteforpedro

    voteforpedro Member

    632
    0
    16
    Can't figure out how to remove the O/S front door. Having great difficulty considering it's bent and won't shut properly. Any tips?
     
  2. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,182
    770
    113
    arent there two large torx screws that hold the hinge onto the side of the door?
     
  3. floyd 1.8 turbo

    floyd 1.8 turbo Mirror, Signal, Outmanoeuvre

    632
    3
    18
    There are two torx screws in the bottom hinge which both need removing. On the top hinge is small black cap that needs pulling off to reveal a 7mm bolt, loosen or remove the bolt. You need to take off the interior trim in the footwell thats held in with two phillips screws and disconnect the electrics behind. Feed the cables and plugs through the hole in the a pillar then lift the door upwards and off she comes.
     
  4. voteforpedro

    voteforpedro Member

    632
    0
    16
    Thanks. :)
     

Share This Page