1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to check if S line is 143 or not? Does not state in logbook.

Discussion in 'Audi S4/A4/A4 Cab (B8 Chassis)' started by torx, Aug 27, 2013.

  1. torx
    Offline

    torx New Member

    Joined:
    Aug 20, 2013
    Messages:
    21
    Likes Received:
    3
    [Aug 27, 2013]
    I am just looking at a 2010 Audi A4 2.0 TDI S line Start Stop and am not sure if it is a 143 or not. It is advertised as a 143 but in the logbook all it states is Audi A4 2.0 TDI S line (or something like that). It does not show the power value anywhere on the logbook. Does your logbook show this (if you have the S line 143)?

    Looking at the Parkers Car Specs there are 3 engines it can be:

    2.0 TDI (136bhp) S line (Start Stop) 4d
    2.0 TDI S Line (Start Stop) 4d
    2.0 TDI (143bhp) S Line (Start Stop) 4d

    Any help would be appreciated.
    #1
  2. Ads

    Ads

    [Oct 2, 2014]

  3. claudefrog
    Offline

    claudefrog Member

    Joined:
    Dec 13, 2006
    Messages:
    372
    Likes Received:
    1
    [Aug 27, 2013]
    if you check the sticker in front of the service history book it will give you the power rating there.

    should also find same sticker on the boot floor I believe
    #2
  4. torx
    Offline

    torx New Member

    Joined:
    Aug 20, 2013
    Messages:
    21
    Likes Received:
    3
    [Aug 27, 2013]
    Thanks, much appreciated.
    #3
    claudefrog likes this.
  5. torx
    Offline

    torx New Member

    Joined:
    Aug 20, 2013
    Messages:
    21
    Likes Received:
    3
    [Aug 27, 2013]
    Got them to send a photo over. Just checked, 105KW, so it is 143. Thanks again
    #4
    claudefrog likes this.

Share This Page