these are some photos of my 3.2 v6 sport my wheels are 17 inch , i dont mind the wheels , how ever i would like some genuine roters , but all down to cost , and after market ones are alot heavier . the question is how low would look ok with my standard wheels to fill the arch nicely . it looks very high , are my shocks the same as a sline but with different springs , my dad has a standard 1.9 deisel and it is higher than this . i think my car is 15mm lower than standard. and the sline is 25mm lower and the s3 is 35mm lower than standard. so if this is the case if i brought 35mm lowering springs it would lower my car 20mm is this correct ?