1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hose into airbox

Discussion in 'A3/S3 Forum (8L Chassis)' started by anderswhk, Oct 15, 2012.

  1. anderswhk

    anderswhk Member

    Joined:
    Feb 17, 2012
    Messages:
    212
    Likes Received:
    4
    anders.jpg

    This hose, can i just put a rag in it, or does it HAVE to be connected to the filter? I dont have anything to tighten it currently.
     
  2. jojo

    jojo Looking for Boost!
    Staff Member Moderator Audi S3

    Joined:
    Sep 4, 2003
    Messages:
    27,139
    Likes Received:
    2,312
    I have a filter on the end of mine.

    [​IMG]
    [​IMG]
     
  3. <tuffty/>

    <tuffty/> Badger 5 Edition...Its all about the flow...
    Staff Member Moderator

    Joined:
    Sep 14, 2008
    Messages:
    17,466
    Likes Received:
    2,034
    Secondary AIr Intake (SAI)... draws air into the exhaust ports for emissions purposes... most peeps either stick a little air filter on it (cheap from ebay) or do an SAI delete (see stickies...)

    <tuffty/>
     
  4. anderswhk

    anderswhk Member

    Joined:
    Feb 17, 2012
    Messages:
    212
    Likes Received:
    4
    Can i drive home with it exposed?
     
  5. <tuffty/>

    <tuffty/> Badger 5 Edition...Its all about the flow...
    Staff Member Moderator

    Joined:
    Sep 14, 2008
    Messages:
    17,466
    Likes Received:
    2,034
    Yarp...

    <tuffty/>
     
  6. anderswhk

    anderswhk Member

    Joined:
    Feb 17, 2012
    Messages:
    212
    Likes Received:
    4
    Any idea which size neck i will need? Cant go and measure it myself at the moment.
     
  7. Jason.s

    Jason.s Active Member

    Joined:
    May 12, 2010
    Messages:
    2,879
    Likes Received:
    348
    Think it's 28mm.
     
  8. AVLO

    AVLO Active Member

    Joined:
    Mar 20, 2012
    Messages:
    288
    Likes Received:
    46
    is there any drawbacks to doing the SAI delete PT?
     
  9. T3 BRL

    T3 BRL New Member

    Joined:
    May 12, 2012
    Messages:
    23
    Likes Received:
    0
    Hi gguys what are the induction kits used on the pics above?
     
  10. jezzy

    jezzy Member

    Joined:
    Oct 3, 2011
    Messages:
    762
    Likes Received:
    15
    delete the sai and save some weight.
    i ditched mine and the evap and n112 and the n249.
    All the stickies, no problems if you use resistors or leave electrically connected.
     
  11. <tuffty/>

    <tuffty/> Badger 5 Edition...Its all about the flow...
    Staff Member Moderator

    Joined:
    Sep 14, 2008
    Messages:
    17,466
    Likes Received:
    2,034

Share This Page