1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hit and miss boost HELP

Discussion in 'A4/S4 forum(B5 Chassis)' started by Si22A4, Jul 15, 2012.

  1. Si22A4
    Offline

    Si22A4 New Member

    Joined:
    Jul 15, 2012
    Messages:
    4
    Likes Received:
    0
    I had no boost with a fault of low boost pressure. Had my turbo re-conditioned new de cat pipe and everything works fine sometimes. If you accelerate sometimes there's no boost if you let of the throttle and go back on boost is there. Changed the boost sensor and still the same problem. Do you think this is electrical fault or mechanical ? My car is Audi A4 115 se 2000 model. Many thanks
    #1
  2. AudiiduA
    Offline

    AudiiduA Member

    Joined:
    Feb 23, 2010
    Messages:
    359
    Likes Received:
    1
    N75 or MAP sensor!
    #2
  3. aragorn
    Offline

    aragorn "Stick a V8 in it!" Staff Member Moderator

    Joined:
    Jan 30, 2008
    Messages:
    15,539
    Likes Received:
    303
    check all the vacuum pipework is intact with no splits/leaks and make sure the VNT actuator on the turbo is free to move.

    If those check out then look at a new N75 valve.
    #3
  4. Si22A4
    Offline

    Si22A4 New Member

    Joined:
    Jul 15, 2012
    Messages:
    4
    Likes Received:
    0
    Thank you
    #4
  5. Si22A4
    Offline

    Si22A4 New Member

    Joined:
    Jul 15, 2012
    Messages:
    4
    Likes Received:
    0
    I think it might be something to do the vacuum pipes as there was a big rumble and its blown off my exhuast gasket, what do you think? many thanks
    #5
  6. Si22A4
    Offline

    Si22A4 New Member

    Joined:
    Jul 15, 2012
    Messages:
    4
    Likes Received:
    0
    I had a problem and it blew off my exhuast gasket. do you think this has something to do with the vacuum pipes?
    #6

Share This Page