1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

high beam/low beam problem

Discussion in 'Classic Audi Forum' started by DoctorD15, Oct 23, 2006.

  1. DoctorD15

    DoctorD15 New Member

    Oct 22, 2006
    Likes Received:
    87' audi quattro 5000cs. When i flick the headlight switch all the way up it automatically goes to high beams. At this point it should be in low beams and when u move the switch that controls low and high foreward it should go to high beams then. When u fiddle with the switch u can see the lights going from high to low, but im just not sure what to fix on it. Anyone else have a similar problem taht could help me out.
  2. Advert Guest Advertisement

  3. Rev-head

    Rev-head Active Member

    Oct 14, 2004
    Likes Received:
    Sounds like your indicator/high beam stalk is knackered or is very dirty and needing cleaned i would remove and give it a clean with electrical spray cleaner/carb Cleaner and see if that helps


Share This Page