1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,060
    583
    113
    I had the same problem with my headlight adjustors when I first bought my car, upon further investigation the adjuster links between the light and the electric adjustment motor had come adrift.
     
  2. SmoothAssault

    SmoothAssault Will design for mods

    822
    53
    28
    Oh, so your electric adjuster on the dash wasn't working? My dash adjuster seems fine.

    Only problem is that the zero setting is too high, and so needs to be set to two or three for the beam height to be what I think *should* be zero (acceptable, unloaded height).
     
  3. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,060
    583
    113
    Have a look in the manual, from memory the meanings of the settings on the dial isn't as obvious as you would expect!

    If not them just set the dial for 1 (Driver plus no luggage?) and get a garage to adjust the headlights in that position to 'calibrate' the dash adjuster.
     
  4. SmoothAssault

    SmoothAssault Will design for mods

    822
    53
    28
    Sounds like a plan. Cheers James :thumbsup:
     
  5. Garfie

    Garfie Member

    179
    0
    16
    Bear in mind there's 2 adjusters on the top of each headlamp, one for up/down movement and one for left/right.
     
  6. silversurfer

    silversurfer Member

    223
    0
    16
    Has any one changed there Full Beam or Fog light bulbs to match the HIDS.?
     
  7. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,060
    583
    113
    There's loads of threads on this, try HERE for starters.
     
  8. razza1

    razza1 Well-Known Member

    3,075
    829
    113

    No, normal size I believe, don't think I've seen "tiny" ballasts?
     

Share This Page