1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hi new to this site

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by Bennyboy87, Apr 29, 2013.

  1. Bennyboy87
    Offline

    Bennyboy87 New Member

    Joined:
    Apr 29, 2013
    Messages:
    3
    Likes Received:
    0
    [Apr 29, 2013]
    Hi all i just px my 325i a brought this dunno if the picture will upload,
    i just want to know whats the best thing to get more power and tuners near basingstoke in hampshire!
    The car only has 72000 on the clock with one owner so i prob paid over the odds a little bit but looks nice an drives well
    look forward to talking to you all

    Attached Files:

    #1
  2. Ads

    Ads

    [Dec 18, 2014]

  3. quattrojames
    Online

    quattrojames Moderator Staff Member Moderator

    Joined:
    Mar 28, 2008
    Messages:
    13,933
    Likes Received:
    489
    [Apr 29, 2013]
    Welcome to the site.

    Is it a 1.8T or a 3.0?
    #2
  4. Bennyboy87
    Offline

    Bennyboy87 New Member

    Joined:
    Apr 29, 2013
    Messages:
    3
    Likes Received:
    0
    [Apr 29, 2013]
    Its the 1.8 t mate
    #3
  5. madmike01uk
    Offline

    madmike01uk Member

    Joined:
    Mar 7, 2013
    Messages:
    421
    Likes Received:
    21
    [Apr 29, 2013]
    Nice motor, my mate runs his own tuning company cntuning.co.uk he does shark maps which are one of the best about. He's in Woking so not far from you.
    #4
  6. Bennyboy87
    Offline

    Bennyboy87 New Member

    Joined:
    Apr 29, 2013
    Messages:
    3
    Likes Received:
    0
    [Apr 29, 2013]
    Cheers will give him a call
    #5
  7. Sandra
    Offline

    Sandra MODERATOR Staff Member Moderator

    Joined:
    Sep 12, 2010
    Messages:
    17,003
    Likes Received:
    2,678
    [Apr 29, 2013]
    Hi, welcome to audi-sport.net. You will find lots of useful information in the faqs threads at the top of the page. The guys are all really nice and helpful in here. Enjoy the forum. :) x
    #6
  8. Andie0
    Offline

    Andie0 Member

    Joined:
    Aug 28, 2012
    Messages:
    491
    Likes Received:
    13
    [Apr 29, 2013]
    Hi ben if you read my signiture that will be good for around 240bhp which is the most you can really squeeze from these engines unless you are ready to spend some big bucks and go ko4 turbo or bigger! Theres many good mappers for these engines and they include revo, apr, shark, r tech and obviously custom! I run a revo map as like to play with the settings through the sps software i have got! Exhaust is always a good one with a sports cat or decat if you have freindly mot man, miltek, blueflame are good but i got mine made custom as didnt like how expensive they were and runs real well! Panel filter in the original airbox is what most go for but i opted for the bsr optiflow kit with a heat shield and have had no problems! If your going to go this far then you could go for a stage 2 map which means it would be good to buy a turbo inlet pipe which ypu can get from forge motorsport but there are other makes out there that are also considered good quality! Also will need some injectors from a s3/tt225 which are plug a play, this will allow to get the fueling correct for your new map! You can also opt for a front mount intercooler for your car but i choose against it as most inexpensive kits require a cut out of the crash bar which i was not for! If i find a real decent kit which fits underneath it then i will be purchasing! Hope that helps a little with the start of your modifications! If youmdo choose however to go bigger turbo just do it staright away and dont go down this route i have described first as you will be buying same parts in different fitments and will not be cost effective!
    #7
  9. mattyboyc
    Offline

    mattyboyc Well-Known Member

    Joined:
    Sep 8, 2009
    Messages:
    1,327
    Likes Received:
    37
    [Apr 29, 2013]
    Very nice,
    #8

Share This Page