1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help with rsne

Tony Rog Aug 21, 2010

  1. Tony Rog

    Tony Rog New Member

    Hi could someone please inform me where i am going wrong i am running vcds 10.6 ive removed symphony from 2007 A4 cab and fitted rsne 8E0 035 192K most works fine except my vcds will not connect to radio or nav to code it in. I need to code the DIS. The symphony had quadlock conector as the rsne, does the K wire want moving thanks
  2. B5NUT

    B5NUT Well-Known Member VCDS Map User quattro Audi A6 Audi Avant Owner Group S-line owners group s tronic

    Edit - just re-read the post if you have symphony 3 then you will need to move the k-line wire from pin 7 on the c-connector to pin 5 on the b connector. If you have Bose then there will already be a wire in pin 5 which will need to be move to pin 7 on the same connector.
    Last edited: Aug 22, 2010

Share This Page