1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help with parts please... led lighting under climate control and card holder.

Discussion in 'A3/S3/Sportback (8P Chassis)' started by drnutta, Nov 15, 2011.

  1. drnutta
    Offline

    drnutta Member

    Joined:
    Aug 28, 2007
    Messages:
    374
    Likes Received:
    5
    Hi guys,

    Can someone tell me the parts needed for setting up the red led light thats under the climate control?
    Also the led lighting for the card holder...

    I dont seem to have it in my car... although have the lights on door handles and puddle lights etc...

    many thanks
    #1
  2. Farhan
    Offline

    Farhan Active Member

    Joined:
    Feb 16, 2011
    Messages:
    1,234
    Likes Received:
    55
    #2
  3. Digzz
    Offline

    Digzz "Started From The Bottom"

    Joined:
    Jan 11, 2009
    Messages:
    1,404
    Likes Received:
    67
    I have this part for under the Climate control....if your interested.

    [​IMG]
    #3
  4. Ash187
    Online

    Ash187 Audi Retrofitter

    Joined:
    Mar 12, 2009
    Messages:
    6,491
    Likes Received:
    396
    as farhan said, have a look on that post and the info is all there, i did the climate red led mod and red ambient footwell LEDs to run while the lights are on at night.
    #4
  5. drnutta
    Offline

    drnutta Member

    Joined:
    Aug 28, 2007
    Messages:
    374
    Likes Received:
    5
    Thanks Digzz,

    Rather confused now I have a part thats similar... although the window is much bigger.

    part number 8P0 864 138A...

    So if i understand this ... its a easy mod?

    what about the card holder can you buy one with led?
    Last edited: Nov 15, 2011
    #5
  6. Ash187
    Online

    Ash187 Audi Retrofitter

    Joined:
    Mar 12, 2009
    Messages:
    6,491
    Likes Received:
    396
    Card holder is easy. Just wire up a 3 mm led to the existing led that is found in the ashtray and have it sitting in the groove behind the actual card holder. Farhan did this on his and it looks oem.
    #6

Share This Page