1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help with buying T Piece

Discussion in 'A3/S3 Forum (8L Chassis)' started by darreng1983, Oct 12, 2010.

  1. darreng1983
    Offline

    darreng1983 Member

    Joined:
    Aug 29, 2010
    Messages:
    40
    Likes Received:
    0
    Hi, I've snapped a T-piece from the vacuum system which sits on the top of the rocker cover. It has two outputs of approx 6mm, one of which goes to a three way non return valve and one of 3mm which goes under the inlet manifold. Audi say this isn't available separately and were trying to sell me a load of vacuum pipes for £80 which included the T piece.

    My question is, does anyone know anywhere that I could buy something similar from? I've had a quick look but can only find T-pieces where all the connections are the same size...

    Thanks :)
    #1
  2. DaveA3
    Offline

    DaveA3 Audi A-Trizzle!

    Joined:
    Feb 25, 2010
    Messages:
    2,374
    Likes Received:
    14
    ebay mate just type in t-piece and for example 3mm,6mm,6mm
    #2
  3. Lee172
    Offline

    Lee172 GT3071

    Joined:
    Jul 20, 2010
    Messages:
    431
    Likes Received:
    2
    you could just do the n249 bypass and get rid of all that pipework
    #3
  4. Welly
    Offline

    Welly VX220 SC Driver :)

    Joined:
    Aug 5, 2009
    Messages:
    10,699
    Likes Received:
    117
    #4
  5. jdas03
    Offline

    jdas03 Member

    Joined:
    Jun 29, 2009
    Messages:
    597
    Likes Received:
    1
    Yer do N249 bypass, easy to do, cheap and saves future issues :) + apparently extra boost
    #5
  6. G60DAN
    Offline

    G60DAN Member

    Joined:
    Feb 10, 2010
    Messages:
    331
    Likes Received:
    1
    Just Pull that bad boy out (N249) it's not hard.
    #6
  7. 1animal1
    Offline

    1animal1 The Clar!! it mouves!!!

    Joined:
    Dec 27, 2007
    Messages:
    9,981
    Likes Received:
    31
    yup another for the N249 bypass....when i wanted one of these i searched high and low, ended up using a wiper washer T piece then a reduced sized extension piece which i had to glue into one end......you will never find a T piece with a reduced nib on
    #7

Share This Page