1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help wiring up 1 piece headlights

Discussion in 'A4/S4 forum(B5 Chassis)' started by imported_kris_tdi, Mar 27, 2006.

  1. Right, need some help with the wiring on ecodes.

    i have the valeo headlights, 2x oem motors and 2x plugs (8d0973734) to convert the old wiring to fit the new lights.

    what im having trouble with it getting the pins to fit the plug (part number above). audi only sell a part lomb, which i dont want.

    What has everyone else done to wire them up.

    currently i have the 2 piece lights that use a round 5 pin plug.

    regards

    Kris
     
  2. Broken Byzan

    Broken Byzan Photographic Moderator
    Staff Member Moderator VCDS Map User

    Joined:
    Apr 26, 2004
    Messages:
    12,964
    Likes Received:
    381
    I have read about people stripping the old lights out and making adapters from the wiring that plugs direcctly into the audi loom.

    Its probably what i would do if it were me
     
  3. RichA3Turbo

    RichA3Turbo ...Watching you!
    Staff Member Moderator

    Joined:
    Jan 6, 2003
    Messages:
    5,089
    Likes Received:
    4
    you have to buy cables for the specific plugs... They are double ended, so buy half as many as you need, and then chop them in half. What i did was remove the conenctor from the told lights, and make an adaptor so i didnt need to modify the vehicle loom.

    Rich
     

Share This Page