1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help required for retrofitting auto dim mirror and light sensor

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by Gazthesparky, Jul 14, 2012.

  1. Gazthesparky
    Offline

    Gazthesparky Member VCDS Map User

    Joined:
    Dec 28, 2011
    Messages:
    198
    Likes Received:
    13
    [Jul 14, 2012]
    I'm part way through retrofitting a auto dim mirror and rain and light sensor and I've got a couple of questions and I'm stuck on a few bits

    I've brought a loom for the mirror from kufatec and added 3 extra cables for the rain sensor

    First problem
    According to elsawin the mirror gets power from fuse 31 which is already used but the fuse legend also includes the mirror but it's fused at 15 amps and the cable in the loom and mirror are very small I have a gut feeling that they are too small

    The rain sensor is powered off of fuse 17 which is a 10 amp and it says it's for the headlight levelling it's ok though I have wired it with .75mm cable I'm just going to solder this onto the outgoing cable.

    The next problem I've got is that elsawin says the mirror requires a connection to pin 5 of the black 23 pin connector on the power module. Problem is theres already a cable in the connection but I'm not sure if this should be the case and I just need to solder onto this cable

    Last question is I want to retrofit the external auto dimm mirrors so need to connect the 2 cables from the internal mirror to the external ones

    Elsawin says that there should be connections in the a pillars It the connection blocks that it stars arnt there I take it I just have To wire the cables directly to the door controllers

    Elsawin tells me the pins I need to connect to on the door controllers but it doesn't state what connections I need to take out of the controller to the glass itself my wing mirrors don't have these connections in so I need to wire them from the door controller to the external mirrors. If someone knows the door controller pin outs to the mirror I would be grateful

    Sorry for the long post and lots of questions but any help would be gratefully received

    Cheers
    Gaz
    #1
  2. Ads

    Ads

    [Nov 28, 2014]

Share This Page