1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help please fault code 17748

tony696 Nov 6, 2010

  1. tony696

    tony696 Member

    165
    2
    16
    im after i abit of help please
    ive put a set of steel rods and a hybrid turbo on my s3 apy engine and timed it back up but i keep getting a fault code
    17748/P1340/004928 - Camshaft Position Sensor (G40) / Engine Speed Sensor (G28): Incor. Correlation
    but car runs perfect with no miss fire can any one help please
    or advised whats the best way to time it up ??

    Thanks tony
     
  2. AudiS3-Turbo

    AudiS3-Turbo Member

    619
    27
    18
    your sure you got the cam timing right? looks like its out by the fault code
     
  3. gary3306

    gary3306 Active Member VCDS Map User

    989
    40
    28
    I would agree with that. It can be a tooth out either side, still run fine be it slightly advanced or retarded, and will still throw up a fault because the position sensors pick that margin of error up.
     
  4. tony696

    tony696 Member

    165
    2
    16
    thanks mate will re time it tomorrow cheers
     
  5. murran

    murran Well-Known Member

    1,545
    39
    48
    you sure its not a tooth out on the cam chain.... it will still run okish but will come up with this fault.
     
  6. tony696

    tony696 Member

    165
    2
    16
    would it be chain side ive not touch it only put new head gasket and cambelt kit mate
     
  7. AudiS3-Turbo

    AudiS3-Turbo Member

    619
    27
    18
    if you havent touched the chain its probably not going to be that,but its worth checking it all just in case.
     
  8. tony696

    tony696 Member

    165
    2
    16
    thanks mate
     

Share This Page