1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help please airbag light!

Dan-A3-Quattro Mar 6, 2014

  1. Dan-A3-Quattro

    Dan-A3-Quattro Member

    Messages:
    32
    Likes Received:
    3
    Trophy Points:
    8
    Can some one help me please, I've removed the pre tensioners and airbags from my A4 as I've turned it into a track day car, now I want to MOT it they said it will fail if the light is illuminated? Does anyone know the resistance of the tensioners and airbag for me to fit resistors for the light to go out?

    dan
     
  2. Sulli79

    Sulli79 Active Member

    Messages:
    541
    Likes Received:
    37
    Trophy Points:
    28
    Do you have them still to measure them? What happens if you remove the module, does it still light up on the dash?
     
  3. jbh

    jbh TDi lover

    Messages:
    1,333
    Likes Received:
    145
    Trophy Points:
    63
    I managed to put a bulb into a vectra dash with 2 wires coming off it going to the oil light in the past. could be worth a bash.
    could also just try pulling the bulb out it. you never know.
     
  4. tonya4

    tonya4 TDi Powerrrr

    Messages:
    408
    Likes Received:
    5
    Trophy Points:
    18
    I fitted a resister each side when I fitted my bucket seats,will have a look and see if I can find what value they are.They sorted my airbag light out.
    tony
     
  5. Dan-A3-Quattro

    Dan-A3-Quattro Member

    Messages:
    32
    Likes Received:
    3
    Trophy Points:
    8
    Thanks for they replies lads, I've sorted it with 3x 2.2 ohm resistors and cleared the faults,
     

Share This Page