1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help on how to re-code RNS-E - Idiot Guide needed!!!

Lee78 Dec 3, 2010

  1. Lee78

    Lee78 Active Member

    142
    29
    28
    I'm fitting an RNS-E unit into my Audi A3 2.0 TDI without BOSE replacing a Concert stereo. The RNS-E has come from an Audi S3 with Bose.
    I'm assuming I will need to re-code the RNS-E to be configured to my car's settings. Can anyone tell me how I do this. Assume I have zero knowledge of where to start so the very basics need to be covered to help me.
    Cheers for any help..
    Lee
     
  2. roman3000

    roman3000 Member

    316
    3
    18
    Have a read through HERE, i havent coded one myself but it doesnt look hard.
     
  3. Lee78

    Lee78 Active Member

    142
    29
    28
    Cheers for that info, really useful. Just contacted a local garage to ask if they will let me bring my car in for ten minutes and 'borrow' Vag-Com to re-code when I get the RNS-E installed...
     
  4. roman3000

    roman3000 Member

    316
    3
    18
    Good luck with it, fitted mine a few weeks back and really like it.
    Also there may be some members with VCDS near you that might be able to do it too for a few quid.
     

Share This Page