1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help needed asap

tazzy baby Jan 13, 2013

  1. tazzy baby

    tazzy baby Welsh & Proud

    569
    2
    18
    hi im in the middle of putting my enginge back together and i dont have a book so does any one know the torque settings for a cam carrier for a 2.0 alt engine please cheers
     
  2. stu_m

    stu_m Well-Known Member VCDS Map User

    1,440
    38
    48
    would it be called a bearing ladder?

    If so its a new bolt jobbie and they are two stage

    stage 1 - 8nm or 6lbf ft
    stage 2 - angle tighten 90°
     
  3. tazzy baby

    tazzy baby Welsh & Proud

    569
    2
    18
    not sure dude its the luminium cast the bolts the cams down
     
  4. stu_m

    stu_m Well-Known Member VCDS Map User

    1,440
    38
    48
    Im pretty sure it is the bearing ladder as there is nothing else in the haynes manual for it

    If it hold the cams down then it will have bearings in it and it will be ladder shaped
     
  5. stu_m

    stu_m Well-Known Member VCDS Map User

    1,440
    38
    48
  6. tazzy baby

    tazzy baby Welsh & Proud

    569
    2
    18
    cheers butty ;)
     

Share This Page