1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Has anyone fitted an aftermarket (copy) Votex kit to their a4?

Az Jan 17, 2011

  1. Az

    Az Hard slammed!

    1,040
    35
    48
    Hi,

    As some of you know from my previous posts I'm looking into getting a Votex kit for my car, and was wondering if anyone has fitted an aftermarket copy kit before? And if so how does it fit / quality? Where did you get it from?

    I'm looking at the 'quattro' kit, which is basically a Votex kit on autoalloys website, anyone got one from there?

    Cheers,
    Az
     
  2. 19scotty81

    19scotty81 Push down and across !!!!!!!!!

    107
    0
    16
    We used to fit the votex kits on the demo's at work when they first came out and it seemed to depend a lot on how much time you had for trial fittings and little tweaks to get the best out of them. "Preparations" the key to a nice fit and plenty of panel wipe cos there's usually glue everywhere !!!
     
  3. C17LJR

    C17LJR Member VCDS Map User

    513
    1
    18
    even the factory fitted/genuine votex kit is a bad fit so even harder for copied parts to fit.

    best to go with gmbh ones, i'll swap you;)
     
  4. A4 nut

    A4 nut Member

    351
    0
    16
  5. LandSpeed

    LandSpeed Member

    229
    1
    16
    AZ - - i thought you had a S4 kit on yours ? if so, will you be selling your S4 rear bumper ???
     
  6. Az

    Az Hard slammed!

    1,040
    35
    48
    Thanks for the feedback guys.

    My mate owns his own bodyshop so he'd be the one fitting it and his very good at what he does, he also knows how fussy I am so he'll make sure it's as good as it could be.

    I'd go for that genuine back bumper skirt if they had the rest of it to go with it! Haha, I wouldn't wanna get just a genuine back part and have to settle for non genuine for the rest of it, I'd rather keep it all from one manufacture.

    I have got a full genuine s4 kit on mine landspeed, so I'll bare you in mind, but really unsure if I should take the plunge and go for a non genuine votex in place of my genuine s4 kit....... Hard cos I do much prefer the Votex styling to the s4, but I'd be pissed if fit and quality is rubbish of the Votex.
     
  7. LandSpeed

    LandSpeed Member

    229
    1
    16
    OK Az, just let me know if you do decide to part company.........cash waiting :eyebrows:
     
  8. Az

    Az Hard slammed!

    1,040
    35
    48
    I will do mate! :)
     
  9. C17LJR

    C17LJR Member VCDS Map User

    513
    1
    18
  10. Az

    Az Hard slammed!

    1,040
    35
    48
    I like your style there Carl! Find me as many bodykits so you can get your hands on my s4 kit! ;)

    Cheers for that though mate, unfortunately I can't view any of those bodykit galleries though cos they require a flash media thing to be downloaded, and I'm on my iPhone at the mo, so will have to wait until I can get on the laptop tonight. I'd love to check out the wide body kits though, that'll go nicely with the new 9.5" rims I've just ordered to go on each corner!

    Do you manage to get the part number to the front recess plate at all mate? :) now cfoster is making me up some new plates I wanna get the recess plate ordered so I can get them both fitted at the same time. :)
     
    Last edited: Jan 18, 2011
  11. C17LJR

    C17LJR Member VCDS Map User

    513
    1
    18
    lol, don't know what you mean Az, i'm just trying to help ;) theres some nice kits there, think you'll like them, heres a link to the parts without going through the gallery

    :: a4mods.com :: - The Premiere Audi A4 Modification Guide and Pictures Library

    as for plate recess cover, sorry, here you go - 8E0-807-240-B-GRU
     
  12. Az

    Az Hard slammed!

    1,040
    35
    48
    Top banana, cheers for that Carl! ;) (on both accounts)
     
  13. Az

    Az Hard slammed!

    1,040
    35
    48
    Loving that USP wide body kit!!

    Owwwwwwww I wish I lived in the states where all these parts are so readily available and more than likely affordable. :(
     
  14. C17LJR

    C17LJR Member VCDS Map User

    513
    1
    18
    i've got an account with fedex if it helps ;)
     
  15. Az

    Az Hard slammed!

    1,040
    35
    48
    Don't tempt me Carl!!!!! (or is that the point?!) :D
     
  16. C17LJR

    C17LJR Member VCDS Map User

    513
    1
    18
    lol, seriously Arron, i'm just a helpful guy, thats all
     
  17. Az

    Az Hard slammed!

    1,040
    35
    48
    Haha, you are mate! Only thing is your at the other end of the country to me... :/
     
  18. C17LJR

    C17LJR Member VCDS Map User

    513
    1
    18
    we can sort that easy ;)

    if you mean for delivery, i can get it delivered to you
     
  19. LandSpeed

    LandSpeed Member

    229
    1
    16
    me to, i can help you with delivery, i run a national transport operation.........there is nothing stopping you now Az :superman:
     
  20. C17LJR

    C17LJR Member VCDS Map User

    513
    1
    18
    ;)
     
  21. Az

    Az Hard slammed!

    1,040
    35
    48
    Ha look at you two ganging up on me! Haha.

    Well I'm seriously thinking of kits and whether I should go for something different, but I like the s4 kit as an OE kit, and I like the fact it fits properly, so some serious thinking needs to be done I think!
     
  22. Malko

    Malko Member

    41
    1
    8
    Thouht this myt be a tease for you as well . . . . . . !

    Why is this not available in Europe https://pgperformance.com/product.php?productid=16980&cat=1570&page=1 . . . . . . its soooooooooo nice. Works out @ £307.12!!!

    Reckon you could get it shipped for close to £150 + spraying n fitting & its just getting too expensive!!!!!!!

    I emailed Devals US stockist (above is Canadian) n they said they could do the bumper + shipping for $790 which is about £568.50 but their price for the bumper was about £100 more than candaian stockist (from whom i am still awaiting a response) so maybe take a oner off that if they get back to me! They also say Air Freight would cost $425 ..... not much less than the bumper!

    Maybe worth a think but like i said, looking a wee bit on the expensive side at the mo!
     
  23. C17LJR

    C17LJR Member VCDS Map User

    513
    1
    18
    as mentioned in the other thread (S4 bumper), probably pay the same if not less from a dealer on your door step
     

Share This Page