1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Front spacers sizes

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by jaceyq, Apr 22, 2013.

  1. jaceyq
    Offline

    jaceyq Member

    Joined:
    Nov 23, 2008
    Messages:
    188
    Likes Received:
    1
    Hi can someone tell what size spacers roughly I will need to put on the front end of my setup . I am currently running 19x 8.5 rims et 35 on 215 35 tyres . Can someone tell me what size spacers I will need to fill the arches up on the front . The car is also on air as well . Let me know . Cannot be bother to measure from centre to arch . Someone out there should or know best !!!
    #1
  2. Big Al
    Offline

    Big Al A4 2.0T FSI Quattro

    Joined:
    May 23, 2011
    Messages:
    349
    Likes Received:
    1
    I run 18x9 ET52 with 245/40/18 tyres and 15mm spacers on front (so ET37) tyre sits flush.

    With 19x8.5 ET35 with 215/35/19 tyres I would say a 5mm spacer (so ET30) would sit flush.

    Alistair
    Last edited: Apr 24, 2013
    #2
  3. V6 Quatt
    Offline

    V6 Quatt Member

    Joined:
    Feb 29, 2008
    Messages:
    817
    Likes Received:
    4
    Would'nt the front be too wide giving that they are ET35? wouldn't 5 mil be about right??
    #3
  4. ajax1976
    Offline

    ajax1976 Member

    Joined:
    Oct 23, 2012
    Messages:
    505
    Likes Received:
    5
    Agree, I wouldn't go less than ET30. I'm ET32 and very close to flush with a 19x8.5j wheel and a 225/35 tyre(changing to 235 soon)

    [​IMG]
    #4
  5. jaceyq
    Offline

    jaceyq Member

    Joined:
    Nov 23, 2008
    Messages:
    188
    Likes Received:
    1
    This is how the 5 mm looks when lower . I still think it can come out a bit wider .
    #5
  6. jaceyq
    Offline

    jaceyq Member

    Joined:
    Nov 23, 2008
    Messages:
    188
    Likes Received:
    1
  7. D2NY G
    Offline

    D2NY G Active Member

    Joined:
    Apr 20, 2011
    Messages:
    1,044
    Likes Received:
    0
    need more pics of ya car man, only seen a few
    #7
  8. D2NY G
    Offline

    D2NY G Active Member

    Joined:
    Apr 20, 2011
    Messages:
    1,044
    Likes Received:
    0
    are you wanting to air out onto the lip of the wheel?

    think felondnb got a good stance like that maybe hes the man to ask
    #8
  9. jaceyq
    Offline

    jaceyq Member

    Joined:
    Nov 23, 2008
    Messages:
    188
    Likes Received:
    1
    image.jpg

    This is the measure without any spacers . Going to try 20
    mil and see how they look .

    Attached Files:

    #9
  10. jaceyq
    Offline

    jaceyq Member

    Joined:
    Nov 23, 2008
    Messages:
    188
    Likes Received:
    1
    The other one is where it had been slammed hence it inner more .
    #10
  11. ajax1976
    Offline

    ajax1976 Member

    Joined:
    Oct 23, 2012
    Messages:
    505
    Likes Received:
    5
    Space it out with washers until you're happy, measure the washers then order that size. Obviously don't drive with the washers fitted:)
    #11

Share This Page