Separate names with a comma.
Discussion in 'A3/S3/Sportback (8P Chassis)' started by Finally Got An A3, Mar 29, 2010.
Ok my bumper is part number 8p4807437d/e. I dont even think its sline but i need the tow cap
will this fit onto the A3?
He has made some modifications to it but it still looks like it should fit?
Scottie can you confirm as you have it fitted on your A3
It will fit your A3. I have one waiting to go on too! The Splitter seems to fit loads of cars lol, even our A6!!!
thanks sarah... so have you found the S3 bumper yet?
i am considering it too but the cost of the bumper is quite high. I did get myself a s-line bumper without the headlight washer holes and the body shop said he should be able to get it cut... he is an insurance approved German car specialist
hey Sarah, how much did you get the splitter for? im just looking at different prices and wondering what would be a good deal?
No still looking, they do seem dear but do have the holes! I was offered an S Line without holes but didint feel it would be a smooth cut to be honest and didnt want it spoilt if it went a bit wrong! You will be ok if hes a good guy!
Ah I was a lucky girl, I paid £20 from Seat, he was a great guy too. Seen them loads dearer on Ebay but most Seat places charge around £20-£25 so better.
nice to know, i will be going round to a seat very soon to part with another £20... this site really does make you spend money
Yeh, makes you spend far too much and there are lots of guys helping you spend it too lol...good though!
haha always nice to be mentioned granted the same happens to me, and on a big scale
Well, come on Phil, going off you're sig, you have cash waiting lol, thats a red rag to a bull !!! Easier spending yours than ours lol
You need a bigger pic! Blow it up a bit!!!! So we can see the splitter!
haha got me there i think i may need to update my sig, ill see in a few days time
lol.... 1-0 to me I think!
for now anyway!
lol, if you say so! lol
Yay should be getting my car back on tuesday gunna do my conversion as soon as i get it home!!
Is there a guide to cutting the reinforcement bar and changing the foglight plugs?
IVE CURRENTLY GOT MY BUMPER OFF AND DONT KNOW HOW TO CHANGE THE FOGS, HELP
Does any1 know if it's possible to fit a bonnet and front bumper from a b7 model a4 to the older b6 model ?
Hey Sarah, just to let you know the garage took my car today for the day while i was at work and they cut the washer holes into the new sline bumper.
they took off my bumper and washer caps as a template and then made sure they cut it properly. i took a few pics of it which i will post up later. it looks like it was always there but i wont know how good the fit is until it is painted and fitted at the end of the week. got the front and rear sline bumpers going on
Hey thats really good news. Will love to see the pics of what they have done. Still havnt seen many S Lines with jet holes so you've done the right thing. Such exciting times and oooohhh you've beaten me lol. Was hoping I could get mine done for Inters but not looking good
aww dont worry, you will get there...
what is stopping you getting it all fitted?
Bonnet and getting it in the paintshop (and funds a little) plus I desperately need alloys lol or it will look pants! I'll get there lol
I still have the crappy 17" sport alloys on mine, i do want to change it but im doing it one at a time.
im sure you could pick up a bonnet from a scrappy, any bonnet from a single grill will do. i am having my front and rear bumper done for £250. thats fixing up any cracks, cutting the washer holes, getting it properly painted and fitting it onto the car
Good price and alot less hassle for you too. Ive scoured all scrappys near and far, believe me lol! See if you can find me one lol! If not im off to TPS again
I'll keep an eye out for you, least i can do for all the help you have been.
here are the pics of the bumper before it was sanded down and the washer holes were cut and now with the holes cut into the bumper, he had to primer it again after the cut so thats the grey bit.
So my mate at the garage told me to drop off the car in the morning to get the new bumpers on... but have just spoken to him only to be told that the staff that does the paint work is off sick today so it has now been delayed to sometime next week
Aw! thats a shame, but least its next week! Not too long to wait! Chin up!
Any idea how they went about cutting the washer jet holes? what did they use etc...
looks like they did a good job.
So I finally had the front and rear S-Line bumpers finished and fitted. Dropped the car off to the garage in the morning and went off to work. came back after work and found them polishing the new bumpers off.
I also had the FK S3 grill fitted. The Fogs are not yet wired in as I cannot figure out how to wire it into the H11 plug yet, might just get some repair wires and give it a shot otherwise i will be getting the adapters to fit it, does any one know the part number for the adapter?
Hellz, i asked the garage what they used to cut the holes and the guy thought he would be funny and replied the tool used was 'his brain'
he wasn't prepared to give away his secret so im sorry but couldnt find out.
so here are the pictures of the car... gave it a quick wash before coming home...
What do you guys (and girls) think??
now for some xenons for those washers
Oooohhhh!!! looking good! Bet you are really happy!!!! Well you beat me to it lol! And the correct bonnet haa haa...
xenons are needed now! Oh it never ends......
Good job done mate!
Good job! With all this talk of washer jet holes i presumed you had Xenons! I now assume these will be a later mod and getting the washers sorted was just thinking ahead?
He has a sportback, they come with the correct bonnet as standard! ;-)
There was a bonnet on ebay last week, was on buy it now £140 but went within a few hours before i could post up the link on here!
ah! hadnt noticed that, yup already had the right one. Think I will get mine from TPS, cant be bothered searching anymore lol
I didn't understand why the car had washers as it didn't have xenons, but yes i will be fitting in xenons soon, but it has to wait as i really need to save for wedding.
next month i want to finish off the rear parking sensors as they are not wired up... if anyone has any parts for it i would be grateful...
Sarah do you have the loom to connect the sensor to the module? it seems that the loom i have does not fit the sensors so i am guessing i have the loom for the newer smaller sensors.
oh and i have found out the part number for the Sline fog adapter and Cupra spoiler if anyone else needs it...
S-Line fog adapter housing: 3D0 941 165 A - £6.70
Curpa splitter: 1ML 805 903 - £24.70
Yes mine already has rear sensors as factory fit, so all wiring is there. May have issues with plugs but someones going to help when I get to that. Can you send me a pic of the plugs on your loom so I can compare to mine! But theres always a way around things!
Yes save for the wedding! the car will wait for a bit lol!
i will get a pic for you tomorrow,