1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

forge rec valve fmdvspltr

Discussion in 'A3/S3 Forum (8L Chassis)' started by sfield, Nov 2, 2013.

  1. sfield
    Offline

    sfield New Member

    Joined:
    Jun 22, 2013
    Messages:
    15
    Likes Received:
    0
    i have an s3 with bam engine any one fitted one of these
    #1
  2. <tuffty/>
    Offline

    <tuffty/> Badger 5 Edition Staff Member Moderator

    Joined:
    Sep 14, 2008
    Messages:
    15,792
    Likes Received:
    1,284
    Don't fit one... they are sh*t...

    The end...

    <tuffty/>
    #2
    Sam_, g60leigh, Vex182 and 1 other person like this.
  3. <tuffty/>
    Offline

    <tuffty/> Badger 5 Edition Staff Member Moderator

    Joined:
    Sep 14, 2008
    Messages:
    15,792
    Likes Received:
    1,284
    Sorry... bit harsh... I hate split-r's with a passion... :)

    Atmos valves are no good for 1.8t's on std management... the split-r is neither a good atmos or recirculating valve... they leak and have too small a opening to release air... stick to a new (genuine) OE valve or if you insist on a bit of bling a new Forge 007 or 008 (with the revised piston that doesn't leak)

    <tuffty/>
    #3
  4. Lavis89
    Offline

    Lavis89 Active Member

    Joined:
    Aug 18, 2011
    Messages:
    778
    Likes Received:
    133
    There is quite a big thread about it in the FAQs if you want more info, but just confirms everything tuffty just said
    #4
  5. sfield
    Offline

    sfield New Member

    Joined:
    Jun 22, 2013
    Messages:
    15
    Likes Received:
    0
    gone into faq what do i put in
    #5
  6. Vex182
    Offline

    Vex182 Guess what I drive...

    Joined:
    Apr 23, 2012
    Messages:
    917
    Likes Received:
    57
    #6

Share This Page