1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Flat Bottom steering wheel question

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by Gogsie, Feb 18, 2012.

  1. Gogsie
    Offline

    Gogsie Member

    Joined:
    Oct 18, 2010
    Messages:
    32
    Likes Received:
    2
    [Feb 18, 2012]
    Hi Folks,

    I have trawled the search function and haven't been able to answer my question so here goes,

    I'm trying to fit a Flat bottom steering wheel to my 2007 Special Edition A4 Avant my problem is the big yellow connectors are slightly different so my question is: can i just swap the wires over from one connector to another?. See pics below.

    Original wheel:
    [​IMG]
    New Wheel:
    [​IMG]
    Connectors ( Original Wheel has the black wires and purple clip):
    [​IMG]
    Back of connector new wheel:
    [​IMG]
    Back of connector original wheel:
    [​IMG]

    Any help would be greatly appreciated!.
    #1
  2. Ads

    Ads

    [Sep 18, 2014]

  3. Monkey46
    Offline

    Monkey46 Member

    Joined:
    Jun 30, 2010
    Messages:
    31
    Likes Received:
    0
    [Feb 21, 2012]
    I just trimmed the tabs off the side of the new plug when I fitted mine, you need to swap a few wires around to retain correct functionality though :)
    #2

Share This Page