1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

fitting rca leads to a standerd audi head unit ?

Discussion in 'In-Car Entertainment' started by harvey01, Nov 14, 2012.

  1. harvey01
    Offline

    harvey01 Member

    Joined:
    Dec 13, 2011
    Messages:
    434
    Likes Received:
    4
    [Nov 14, 2012]
    hi there i wont to keep the standerd look but need a minium of 1 set of rca leads can it be done or amd i better of getting a cheap head unit with red front
    #1
  2. Ads

    Ads

    [Dec 20, 2014]

  3. AndyMac
    Offline

    AndyMac Moderator Staff Member Moderator

    Joined:
    Jun 10, 2003
    Messages:
    9,833
    Likes Received:
    32
    [Nov 15, 2012]
    Depends on the model/age of HU. All Audi HU's have front & rear pre-outs, they are just not on standard RCA connectors. Some are on mini ISO and later models are on Quadlock. Easiest method is to tap the rear pre-outs at the rear amp or sub depending on what you are going to be using them for.
    The BLAU adapter (PC3-11) provides front and rear RCA's for ISO HU's (all Audi single DIN HU's are ISO as well as pre-2005/6 double DIN). However you have to unplug the existing feed to the rear amp (or Bose amp if you have Bose) in order to connect it.
    Mini ISO Yellow 6 pin pre-outs to RCA Sockets online at Nexxia UK
    So depends what you are doing as to the best method.
    #2

Share This Page