1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fitting OEM Centre Caps to RS4 Replica Rims

madkebab May 23, 2004

  1. madkebab

    madkebab Member

    421
    2
    18
    Anyone done this? If so what bits did you have to cut out and what did you use to do the job? A picture of the reverse of an amended cap would be really useful.
     
  2. kgough

    kgough Member

    88
    0
    6
    I have done this, though I haven't any photos at the moment. Just used a sharp Stanley knife and pliers. If you offer up the centre to the wheel you can see which bits foul. Carefully slice down the offending pieces and snap away with the pliers! If this is not enough info I will try to take some photos in the next day or so.
     
  3. Mike.M

    Mike.M Well-Known Member

    2,510
    170
    63
    They are about £100 for 4 with VAT from Audi
     
  4. kgough

    kgough Member

    88
    0
    6
    I got mine from a guy in Germany on ebay. They were approx. £60 all in.
     
  5. madkebab

    madkebab Member

    421
    2
    18
    Well I managed to get a full set off of UK Ebay for £30 inc P&P which was a bit of a bargain. Took the risk of buying off of someone with 0 feedback but luckily it paid off this time. Have now adpated them to fit the Replicas and they look sweet. I'll post up some pics when I get a chance.
     
  6. carl310166

    carl310166 Member

    49
    0
    6
    £80 all in from my local dealer
     

Share This Page