1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

fitting Cruise control ?

Discussion in 'General Technical / How To' started by Ribzz, Mar 30, 2005.

  1. Ribzz

    Ribzz New Member

    Joined:
    Jul 28, 2005
    Messages:
    2
    Likes Received:
    0
    i was wondering what all i need to fit Cruise control to my 2002 A4 TDi as it dont have it as standard ?
    i found a site were i can get the stalk and partial wireing loom but not sure if it will work ?
     
  2. Google AdSense Guest Advertisement



    to hide this advert.
  3. ajmackie

    ajmackie Member

    Joined:
    Mar 5, 2004
    Messages:
    922
    Likes Received:
    0
    i think you'll find a lot of info if you search under B6 A4.
     
  4. Grant

    Grant Well-Known Member
    VCDS Map User Audi S3 Audi RS3

    Joined:
    Dec 4, 2003
    Messages:
    1,172
    Likes Received:
    80
    If it's the same as the S3, you need the cruise control stock and cable and also an additional cable which connects from the ECU to the bulkhead.

    Installation is pretty straight forward (I did mine myself) however you need VAG-COM of a kind Audi dealer to reset you airbag light after installation and to activate cruise control.
     
  5. kevlibstt

    kevlibstt Member

    Joined:
    Jul 27, 2005
    Messages:
    50
    Likes Received:
    0
    Your car is a 2002 A4 which will require the stalk and no wiring is needed but you may require the steering column ecu depending on which one is already fitted because it needs recoding.
    Hope this helps.
     
  6. foolish3uk

    foolish3uk Member

    Joined:
    Aug 2, 2004
    Messages:
    455
    Likes Received:
    0
    he can get away with the exsisting column ecu, just plug in and activate cruise in the engine ecu! you may have to recode the column ecu.
     

Share This Page