1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fitting CD changer in saloon?

Oranoco Dec 1, 2013

  1. Oranoco

    Oranoco Well-Known Member

    3,998
    408
    83
    Got my trusty Alpine 6 disc sat here, the cables already installed now need to mount the unit itself. How did Audi fit the changer in the saloon as if I can source OE bits to keep it neat I'd be happier.

    Any pics would be super if possible.

    CheeRS guys
     
  2. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,606
    871
    113
    Theres a wee bucket thing that sits in the side of the boot on a prefacelift.

    On a facelift they built out the side panel and installed a cubby hole with a metal framework to hold the changer.
     
  3. Oranoco

    Oranoco Well-Known Member

    3,998
    408
    83
    Can I retrofit the facelift parts easily enough? Do I just need the cage and side trim/door?
     
  4. Sulli79

    Sulli79 Active Member

    541
    37
    28
    If they are compatible I have the cage and all boot trim on my breaker which you can have foc if you come and collect
     
  5. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,606
    871
    113
    i think you might need to install a couple of rivnuts for the cage, but yes, they should be compatible :)

    My brother put the facelift side panel into his S4 when he had it, and that worked fine.
     
  6. Oranoco

    Oranoco Well-Known Member

    3,998
    408
    83
    Nice one :)

    Sulli, pm coming ;-)
     

Share This Page