1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

fitting a leather interior.. HELP ?

Discussion in 'A4/S4 forum(B5 Chassis)' started by ldoshiv2, Jul 13, 2011.

  1. ldoshiv2
    Offline

    ldoshiv2 Member

    Joined:
    Oct 11, 2010
    Messages:
    81
    Likes Received:
    0
    Was wondering if anybody can give us a little advice. I am going down south at the weekend to purchase a leather interior for my car, problem is my car is a B5 2000 plate saloon, this other interior is also a b5 2000 plate saloon although my rear seats at the back are fixed. ( side bolsters ect are intact ) this one was from a 60/40 rear split with detachable side bolsters. i know the front 2 seats and the rear bench seat are exactly the same but the back seat is obviously different. has anyone done this before or know if it is possible to fit ? thanks, Alan.
    #1
  2. aragorn
    Offline

    aragorn "Stick a V8 in it!" Staff Member Moderator

    Joined:
    Jan 30, 2008
    Messages:
    15,526
    Likes Received:
    301
    possible? yes but you'll almost certainly need to crank up the angle grinder and welder.
    #2
    tangerinedream likes this.

Share This Page