1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Finally found some decent BBS CH Replicas but.....

g10chy Mar 4, 2011

  1. g10chy

    g10chy Member

    155
    0
    16
    Hi Guys,

    It's been awhile since I last logged in but previously I was searching everywhere to get some decent BBS CH replicas without the additonal small holes in between the stud holes. Anyway...I think i have found these now :laugh:

    My original plan was to get 18x8s et35 all round but this shop only offers a staggered option with 18x9 etc35 for the rears.

    My question is with 18x8's i was going to get 15mm spacers on the front and 20mm spacers on the back, what size spacers do i need for the 18x9's to have the same look as 18x8 with 20mm spacers?


    Cheers,
    Chris
     
  2. Alex C

    Alex C Well-Known Member VCDS Map User Audi S3

    3,223
    343
    83
    to exactly match your 8" ET35 with 20mm spacer

    your 9" ET35 requires a 7.5mm spacer, so something around a 7.5mm spacer
     
  3. g10chy

    g10chy Member

    155
    0
    16
    Cheers Alex!!
     
  4. [Dave B]

    [Dave B] Daddy

    2,027
    145
    63
    Can you share where you have found these mythical beasts?
     
  5. DJ_Troopa

    DJ_Troopa K1 Driver

    1,743
    14
    38
    When i was running the CH reps i had 8x18's all around. 20mm spacers on the back and 15mm spacers on the front. If you look at my sig that's how it looked. CH reps now gone though... new wheels sitting at home waiting for a little make over :)
     

Share This Page