1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

few questions on the 1.9 tdi 130bhp

Discussion in 'A4/S4 forum(B5 Chassis)' started by K7ERG, Mar 4, 2011.

  1. K7ERG
    Offline

    K7ERG Member

    Joined:
    Aug 18, 2003
    Messages:
    372
    Likes Received:
    0
    [Mar 4, 2011]
    Can I fit the indicator stalk with trip computer control to a model without computer on clocks.? If I buy clocks with trip computer.? What's involved to get readings? Is there a loom?

    More power? How? Just a remap available ?
    What boost on standard 130bhp engine?
    Will saloon interior fit avant?

    Thanks in advance.
    #1
  2. Ads

    Ads

    [Sep 17, 2014]

  3. ASHIHARA
    Offline

    ASHIHARA Member

    Joined:
    Mar 3, 2011
    Messages:
    253
    Likes Received:
    8
    [Mar 4, 2011]
    Yes,u can fit BC
    most remaps are 160hp and 370-380nm tourque
    standart boost is 1,350bar,after remap is between 1,450-1,550bar,depends the tuner
    #2
  4. K7ERG
    Offline

    K7ERG Member

    Joined:
    Aug 18, 2003
    Messages:
    372
    Likes Received:
    0
    [Mar 4, 2011]
    Is it a straight swap? Plug there to connect? Or is it tracing wires and tapping into them to get readings for trip computer?
    #3
  5. ASHIHARA
    Offline

    ASHIHARA Member

    Joined:
    Mar 3, 2011
    Messages:
    253
    Likes Received:
    8
    [Mar 4, 2011]
    No,is not a straight swap!U have to trancing wires and tapping with ECU and coded.
    #4

Share This Page