hello everybody i have a A3 cab 1.9 tdi which sometimes dies under load untill you left off and try again i have the faultcode 001139 exhaust pressure sensor 1(g450) signal to high.has anybody had this?Thanks for any help i spoke to my local audi garage and the parts lad sold me a thrust sensor???? but still the same.thanks for any help
VCDS Version: Release 10.6.4
Whitegate Motors
Address 01: Engine Labels: Redir Fail!
Control Module Part Number: 03G 906 021 RC HW: 03G 906 021 AB
Component and/or Version: R4 1,9L EDC 000SG 2390
Software Coding: 0000071
Work Shop Code: WSC 01236 785 00200
VCID: 71EDAAE21139
1 Fault Found:
001139 - Exhaust Pressure Sensor 1 (G450): Signal too High
P0473 - 000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 2
Fault Frequency: 9
Mileage: 51555 km
Time Indication: 0
Date: 2011.08.19
Time: 14:45:53
Freeze Frame:
RPM: 2184 /min
Speed: 56.0 km/h
Load: 0.0 %
Voltage: 14.52 V
Mileage: 320 km
Temperature: 192.0°C
Absolute Pres.: 1805.4 mbar
Readiness: 0 0 0 0 1
VCDS Version: Release 10.6.4
Whitegate Motors
Address 01: Engine Labels: Redir Fail!
Control Module Part Number: 03G 906 021 RC HW: 03G 906 021 AB
Component and/or Version: R4 1,9L EDC 000SG 2390
Software Coding: 0000071
Work Shop Code: WSC 01236 785 00200
VCID: 71EDAAE21139
1 Fault Found:
001139 - Exhaust Pressure Sensor 1 (G450): Signal too High
P0473 - 000 - - - Intermittent
Freeze Frame:
Fault Status: 00100000
Fault Priority: 2
Fault Frequency: 9
Mileage: 51555 km
Time Indication: 0
Date: 2011.08.19
Time: 14:45:53
Freeze Frame:
RPM: 2184 /min
Speed: 56.0 km/h
Load: 0.0 %
Voltage: 14.52 V
Mileage: 320 km
Temperature: 192.0°C
Absolute Pres.: 1805.4 mbar
Readiness: 0 0 0 0 1
