1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fault Codes

S4 Muzza Feb 13, 2012

  1. S4 Muzza

    S4 Muzza oww! my giant blue head!

    349
    29
    28
    I got a mate to scan my car last week and there were a few fault codes thrown up. Can anyone help shed some some light on these problems and what the solutions might be? Cheers

    VCDS-Lite Version: Release 1.1
    Monday, 06 February 2012, 18:37:54:38549


    Chassis Type: 8L - Audi A3/S3
    Scan: 01,02,03,08,15,16,17,22,35,37,45,55,56,57,75,76

    -------------------------------------------------------------------------------
    Address 01: Engine Labels: Redir Fail!
    Controller: 8L0 906 018 N
    Component: 1.8L R4/5VT G 0002
    Coding: 05710
    Shop #: WSC 00000
    VCID: 3A07277E3551
    2 Faults Found:
    16795 - Secondary Air Injection System: Incorrect Flow Detected
    P0411 - 35-10 - - - Intermittent - Is this likely to be a faulty sensor somewhere?
    17978 - Engine Start Blocked by Immobilizer
    P1570 - 35-10 - - - Intermittent - Dont really understand this as it starts fine every time
    Readiness: 0000 0000

    -------------------------------------------------------------------------------
    Address 03: ABS Brakes Labels: Redir Fail!
    Controller: 8N0 907 379 E
    Component: ESP 20 CAN V003
    Coding: 18448
    Shop #: WSC 06435
    VCID: 3E0F2B6E2979
    2 Faults Found:
    00285 - ABS Wheel Speed Sensor; Front Right (G45)
    35-10 - - - Intermittent
    00285 - ABS Wheel Speed Sensor; Front Right (G45)
    16-10 - Signal Outside Specifications - Intermittent

    ------------------------------------------------------------------------------
    Address 22: AWD Labels: 02D-900-554.LBL
    Controller: 02D 900 554 B
    Component: HALDEX LSC ECC 0006
    VCID: 1F31F6EA8EB3
    1 Fault Found:
    01316 - ABS Control Module
    79-10 - Please Check Fault Codes - Intermittent



     
  2. voorhees

    voorhees Moderator Staff Member Moderator DSG

    16,132
    1,971
    113
    Clear the faults and scan again,see if any come up again
     

Share This Page