1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fault Codes

stevehall Aug 18, 2010

  1. stevehall

    stevehall Member VCDS Map User

    Messages:
    300
    Likes Received:
    0
    Trophy Points:
    16
    Hi All.

    Anyone help me with what to do next to fix these fault codes?

    Fault 1 & 2 have only just come up, and i have never seen these before
    Fault 3 i have seen and cleared down a few times, so i think its time to fix that one.

    Fault 1
    012600 - Intake Manifold Runner Control: Regulation Deviation
    P3138 - 008 - Implausible Signal
    Freeze Frame:
    Fault Status: 01101000
    Fault Priority: 0
    Fault Frequency: 1
    Mileage: 176592 km
    Time Indication: 0
    Freeze Frame:
    RPM: 2066 /min
    Load: 9.4 %
    Speed: 99.0 km/h
    Temperature: 96.0°C
    Temperature: 23.0°C
    Absolute Pres.: 1000.0 mbar
    Voltage: 13.970 V

    Fault 2
    008200 - Intake Manifold Flap; Bank 1: Electrical Malfunction
    P2008 - 001 - Upper Limit Exceeded
    Freeze Frame:
    Fault Status: 01100001
    Fault Priority: 0
    Fault Frequency: 1
    Mileage: 176592 km
    Time Indication: 0
    Freeze Frame:
    RPM: 2062 /min
    Load: 9.8 %
    Speed: 99.0 km/h
    Temperature: 96.0°C
    Temperature: 23.0°C
    Absolute Pres.: 1000.0 mbar
    Voltage: 13.970 V

    Fault 3
    012555 - Low Pressure Fuel regulation: Fuel Pressure Outside Specification
    P310B - 008 - Implausible Signal - Intermittent
    Freeze Frame:
    Fault Status: 00101000
    Fault Priority: 0
    Fault Frequency: 2
    Mileage: 177616 km
    Time Indication: 0
    Freeze Frame:
    RPM: 4882 /min
    Load: 100.0 %
    Speed: 105.0 km/h
    Temperature: 34.0°C
    Temperature: 21.0°C
    Absolute Pres.: 1010.0 mbar
    Voltage: 14.097 V

    Thanks for taking the time to read!
     

Share This Page