1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fault codes help

Discussion in 'VCDS (formerly VAG-COM) forum' started by Andy_S3, Jul 26, 2008.

  1. Andy_S3
    Offline

    Andy_S3 Member

    Joined:
    May 17, 2007
    Messages:
    722
    Likes Received:
    0
    Hi all, have just run a scan on my brothers 6N polo and the following faults have come up - I've checked the Fault codes Wiki and theyre not listed unfortunately:

    01050 - Glow Plug monitoring
    31-10 Open or short to ground - Intermittent

    01052 - Load signal potentiometer (G157)
    28-10 Short to plus - intermittent

    01204 - Engine temperature sensor (G27)
    30-10 Open or short to plus - intermittent

    01209 - Engine speed signal - Alternator terminal W
    03-00 - no signal

    Appreciate its not an Audi but any help would be greatly recieved!:icon_thumright:
    #1
  2. fyvie11
    Offline

    fyvie11 New Member

    Joined:
    Apr 8, 2008
    Messages:
    2
    Likes Received:
    0
    hi I have just scanned my car with Vag-com and the following fault came up [FONT='Calibri','sans-serif']01052 - Load Signal Potentiometer (G157)[/FONT]
    [FONT='Calibri','sans-serif'][FONT='Calibri','sans-serif']31-10 - Open or Short to Ground – Intermittent[/FONT][/FONT]
    [FONT='Calibri','sans-serif'][/FONT]
    [FONT='Calibri','sans-serif'][FONT='Calibri','sans-serif']Any Idea???[/FONT][/FONT]
    #2

Share This Page