1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fault codes diags after remap - Star Performance

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by prel2000, Sep 24, 2006.

  1. prel2000
    Offline

    prel2000 Member

    Joined:
    Aug 30, 2006
    Messages:
    45
    Likes Received:
    0
    [Sep 24, 2006]
    Can fault codes be read from the diagnostics port following a remap of the ECU?

    I have a OBDII diagnostics reader and everytime I try and connect and attempt to read any errors it come back as "Error". It makes me wonder if the remap on the ECU has altered codes and that they are unreadble and even more so if the fault codes will even display anymore in dash or on a reader?

    Its a star remap done via the dual port systems (Very pleased with remap). I have had it for around 3 weeks and just wanted to know if the car has logged any fault as a result.
    #1
  2. Ads

    Ads

    [Sep 24, 2014]

  3. Olly_K
    Offline

    Olly_K Administrator

    Joined:
    Jun 10, 2000
    Messages:
    2,678
    Likes Received:
    1
    [Sep 24, 2006]
    did it work previously ?
    IMO a remap should touch anything like that.
    #2
  4. prel2000
    Offline

    prel2000 Member

    Joined:
    Aug 30, 2006
    Messages:
    45
    Likes Received:
    0
    [Sep 24, 2006]
    Yeh it was working fine prior to the re-map. Its possible it could be the reader but i guess i wont know until i try another reader if I can get hold of one.

    If there was likely to be a serious fault I guess the car wont run smoothly?

    Have you had yours read following remap?
    #3

Share This Page