1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fault code showing after service reset

chinnyhill10 Jun 16, 2013

  1. chinnyhill10

    chinnyhill10 Member

    Have a fault showing on my A3 after performing a service interval reset. Seems the garage who serviced it for me forgot to do it so I used VCDS to reset it (to get rid of the nag message on startup). But now I have the following error showing:

    ddress 17: Instruments Labels: 8P0-920-xxx-17-MY8.clb
    Part No SW: 8P0 920 981 K HW: 8P0 920 981 K
    Component: KOMBIINSTR. VDO H22 0660
    Revision: D0H22003 Serial number: 2244H003115780
    Coding: 0005428
    Shop #: WSC 00134 210 81327
    VCID: 408FFC5B13A0F71860B

    1 Fault Found:
    00003 - Control Module
    005 - No or Incorrect Basic Setting / Adaptation
    Freeze Frame:
    Fault Status: 01100101
    Fault Priority: 6
    Fault Frequency: 1
    Mileage: 90553 km
    Time Indication: 0
    Date: 2013.06.16
    Time: 13:13:56

    The Rosstech site says this is the module that deals with storing the service info. I did have some trouble trying to reset it (everytime I tried it seemed to have no impact) so tried some different combinations. I cleared the nag message on the dash but now VCDS shows this error.

    Anyone have any idea? Everytime I clear it it comes straight back!

  2. chinnyhill10

    chinnyhill10 Member

    Solved it!

    Channel 43 in the instrument cluster is supposed to have a value of 300. For some reason my value wasn't this (it was 306). Changed it to 300 and the fault cleared.

Share This Page