1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Facelift Headlights

Discussion in 'A4/S4 forum(B5 Chassis)' started by THE MONSTER, May 30, 2014.

  1. THE MONSTER
    Offline

    THE MONSTER Member

    Joined:
    Sep 10, 2008
    Messages:
    186
    Likes Received:
    0
    [May 30, 2014]
    I have acquired some Facelift headlights recently will get around to fitting them soon but need to arm myself with as much info as possible before I start..

    Don't like many mods or upgrades to tell you the truth but this is probably the best one needed for pre-facelift cars..

    Facelift headlight number is 80D41 003-AM.... I want to change the rubber seal that sits on top can you get these and how much if someone can tell me..

    Also the Doner car plug tails D shape plug fitting I have not got yet I don't really want to pay £50 for the plug cables from Germany..

    Not tried going to the scappy yet for them but might have to ..

    I understand Audi do them if so how much and what part number and what do you actually get(plugs with loom)..

    Any info would be appreciated...

    PS.. Silly question but these are correct lights to do the conversion are they not.. light part number above..
    Last edited: May 30, 2014
    #1
  2. Ads

    Ads

    [Dec 18, 2014]

  3. jcb
    Offline

    jcb Active Member VCDS Map User

    Joined:
    Sep 19, 2005
    Messages:
    4,118
    Likes Received:
    13
    [May 30, 2014]
    you will have to remove a bit of the inner wing if I recall, should be obvious when you get busy with the spanners
    Is a loom required?
    Short of a different style plug and fitting that to your existing loom I am not sure what else is required
    #2
  4. THE MONSTER
    Offline

    THE MONSTER Member

    Joined:
    Sep 10, 2008
    Messages:
    186
    Likes Received:
    0
    [May 30, 2014]
    Yeah I know about the inner wing cutting where the pre-facelift indicators were I was thinking more about the plugs the "D" Shape required obtaining them really whether to get from scrappy or as said Audi but what do you get and how much from Audi..

    And is that weather rubber seal that fits on top of the lights available I have them but they have gone a bit hard and if you pull them off then the double sided strips comes away as well..
    #3
  5. foursprungdugtechnique
    Offline

    foursprungdugtechnique Member

    Joined:
    Jan 29, 2011
    Messages:
    281
    Likes Received:
    22
    [May 30, 2014]
    As long as you have decent, non corroded wire, why not just solder and shrink wrap the ends from a scrap car onto your existing loom?
    My car had the rubber strips silicon'd on, was done before I got the car, six years ago. Don't see the point in going to the dealer when the cheap fix will do for years. Not that anyone is going to see them either
    #4
  6. tonya4
    Offline

    tonya4 TDi Powerrrr

    Joined:
    Aug 9, 2010
    Messages:
    409
    Likes Received:
    5
    [May 30, 2014]
    I have a facelift that I am breaking,and have the plugs you need.
    tony
    #5
  7. THE MONSTER
    Offline

    THE MONSTER Member

    Joined:
    Sep 10, 2008
    Messages:
    186
    Likes Received:
    0
    [May 30, 2014]
    I have pm you mate..
    #6

Share This Page