1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Exhaust - what do you reckon ?

Discussion in 'A3/S3/Sportback (8P Chassis)' started by SteveTDCi, Feb 3, 2008.

  1. SteveTDCi

    SteveTDCi Active Member

    Joined:
    Nov 15, 2005
    Messages:
    1,388
    Likes Received:
    0
    Since I cannot be bothered - at the moment, to fit a milltek exhaust i'm going for the next best option. That is to do something with the standard bent exhausts on the 2.0 TDi 140.

    I can either go for something like the 2.0t or the 170 TDi but I think they are a touch too small.

    As for style, i'm torn between slash cut, oval, or round. Obviously it will be two pipes as thats whats standard.

    Anyone have any suggestions ? I like the ovals as per AMG mercs but they are a touch too big !
     
  2. newbiecrg

    newbiecrg windsurfer

    Joined:
    Nov 29, 2006
    Messages:
    1,328
    Likes Received:
    0
    I like the S3 like twin round.... (partial opinion... eheheh) Don't you need a DPF to be able to have straight pipes instead of bent ones? I mean, to be legal?

    I though they were bent so particles were not "sprayed" to the atmosphere... maybe I am mistaken.

    Pedro
     
  3. SteveTDCi

    SteveTDCi Active Member

    Joined:
    Nov 15, 2005
    Messages:
    1,388
    Likes Received:
    0
    No idea of the leaglities, but if that was the case miltek wouldn't do the exhaust. The actual exhasut on the 2.0 is straight, its only the chrome finishers that are directed downwards. I need to go and find a Mondeo ST TDCi, these have a slash cut end but direct the soot downwards.
     

Share This Page