1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Exhaust question TQS

Discussion in 'A4/S4 forum(B5 Chassis)' started by Bradderz_1988, Jun 25, 2012.

  1. Bradderz_1988
    Offline

    Bradderz_1988 Dont replace it, Upgrade it !!

    Joined:
    Aug 19, 2010
    Messages:
    3,230
    Likes Received:
    106
    [Jun 25, 2012]
    Whats the diameter of the standard exhaust on a TQS ???
    #1
  2. Ads

    Ads

    [Sep 18, 2014]

  3. aragorn
    Offline

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    Joined:
    Jan 30, 2008
    Messages:
    15,570
    Likes Received:
    313
    [Jun 25, 2012]
    55 or 60mm OD depending on year according to ETKA.
    #2
  4. Bradderz_1988
    Offline

    Bradderz_1988 Dont replace it, Upgrade it !!

    Joined:
    Aug 19, 2010
    Messages:
    3,230
    Likes Received:
    106
    [Jun 25, 2012]
    So im guna have to measure it then i take it ??
    #3
  5. aragorn
    Offline

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    Joined:
    Jan 30, 2008
    Messages:
    15,570
    Likes Received:
    313
    [Jun 25, 2012]
    ETKA says it changed on chassis number Y-077226 to the larger size, so some time in 2000.
    #4
  6. boost-addict
    Offline

    boost-addict Member

    Joined:
    Aug 22, 2011
    Messages:
    979
    Likes Received:
    35
    [Jun 25, 2012]
    what if you have a 1999.5 just to be awkward, think mins 60mm by looks of it. think i measured 2.25" could be wrong
    #5
  7. aragorn
    Offline

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    Joined:
    Jan 30, 2008
    Messages:
    15,570
    Likes Received:
    313
    [Jun 25, 2012]
    well i'm just going by what ETKA says, the above VIN is when it is supposed to have changed. A 99 would presumably have the earlier 55mm size.

    55mm is 2.16" and 60 is 2.36", so neither are 2.25!
    #6

Share This Page