1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Error code 001137

Discussion in 'VCDS (formerly VAG-COM) forum' started by h5djr, May 6, 2008.

  1. h5djr
    Offline

    h5djr Active Member

    Joined:
    Jan 23, 2003
    Messages:
    7,448
    Likes Received:
    3
    The Emissions Warning Light has just come on on my A3 2.0TDI-170.

    I ran an Auto-Scan and it came up with the following error:

    Address 01: Engine Labels: None
    Part No SW: 03G 906 018 DN HW: 03G 906 018 DN
    Component: R4 2.0l PPD1.2 G 0425
    Coding: 0000078
    Shop #: WSC 06314
    1 Fault Found:
    001137 - Exhaust Pressure Sensor 1 (G450): Implausible Signal
    P0471 - 006 - Short to Plus - Intermittent
    Freeze Frame:
    Fault Status: 00100001
    Fault Priority: 1
    Fault Frequency: 8
    Reset counter: 40
    Mileage: 28976 km
    Time Indication: 0
    Date: 2008.05.01
    Time: 09:32:39
    Freeze Frame:
    RPM: 0 /min
    Torque: 144.0 Nm
    Speed: 0.0 km/h
    Pressure: 42.6 mbar
    Text: -42
    Text: mbar
    Text:
    Readiness: N/A

    I've done some searching but this particular code does not seem to be listed.

    The car is booked in to the dealers tomorrow for them to check, but I wondered if anyone has any idea what would cause the error. The car appears to be running OK.
    #1
  2. Sebastian
    Offline

    Sebastian Member

    Joined:
    Aug 7, 2006
    Messages:
    286
    Likes Received:
    0
    This code is known and quite famous too, can either be the sensor itself, it's pressure lines or the ECU software. Checks are performed in the order I named the issues and last but not least the software update should be performed no matter what. This means your current software version 03G-906-018-DN @ 0425 should be 1247 after your dealer visit. The issue is filed under TPI 2011280.
    #2
  3. h5djr
    Offline

    h5djr Active Member

    Joined:
    Jan 23, 2003
    Messages:
    7,448
    Likes Received:
    3
    I visited my dealer this afteroon and they connected it to their diagnosics computer system. Needless to say it showed the same error. I spoke with Master Technician who was doing the checking and he seem very interested in the fact that I had some software that gave the same result!

    The car is going in on Monday to have it's first AVS service and the technician has ordered a new sensor and pipe lines and said he will look further into it then. He also said the pipes have been modified since mine was built. I think I'll take my laptop with me and let him have a look!
    #3
  4. h5djr
    Offline

    h5djr Active Member

    Joined:
    Jan 23, 2003
    Messages:
    7,448
    Likes Received:
    3
    My car went into the dealers today and they replaced the Exhaust Pressure Sensor and carried out a software upgrade listed as Recall 23B6.

    I run an Auto-Scan tomorrow and see what version of the software this gives.
    #4

Share This Page