1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Engine Cover Kit & R8 Oil Cap

D2NY G Aug 6, 2012

  1. D2NY G

    D2NY G Well-Known Member

    1,088
    132
    63
    Gents,

    Was my bday over the weekend and got a few little under engine gifts (i requested of cause lol)

    Anyways got them fitted and heres the outcome, look rather smart and tidy up the engine bay nicely now

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    TOM.S likes this.
  2. Willalone

    Willalone New Member

    16
    0
    1
    Where did the cover kit come from? thats very smart..
     
  3. dubdemand

    dubdemand VAG Addict

    405
    8
    18
    Looks really good mate! I know the part numbers are elsewhere on the forum but if you have them to hand it would be really useful to have them in here too?
     
  4. A4_MaJiK

    A4_MaJiK Azeem

    924
    108
    43
    I bought these from TPS 2 weeks ago but ended up with the wrong covers for the screenwash and PAS resevoir side and the one covering the air con pipes too as I have the 3.0 TDI lump.

    I'm pretty sure the one on the right hand side covering your screenwash and PAS resevoir is the one I need as it goes straight down. If you have the part numbers for the cover and all the fixings it would be of great help.
     
  5. D2NY G

    D2NY G Well-Known Member

    1,088
    132
    63
    bought it from audi lads

    got part numbers at home somewere
     
  6. BA4

    BA4 Member

    76
    0
    6
    they look very very well i must say, thats added to the list lol, what does the sticker say on the window??
     
  7. D2NY G

    D2NY G Well-Known Member

    1,088
    132
    63
    it says lowdown mate, its a club round sheffield were im from
     
  8. Macdoon

    Macdoon Well-Known Member Team Ibis Gold Supporter Audi A4 S-line owners group

    1,953
    712
    113
    Hi fella, any issues with the R8 oil cap pushing up against the bonnet underside

    Mac
     
  9. D2NY G

    D2NY G Well-Known Member

    1,088
    132
    63
    Not that ive noticed mate, but I will check for ya.

    Gets hot tho on the chrome noticed that lol
     
  10. Macdoon

    Macdoon Well-Known Member Team Ibis Gold Supporter Audi A4 S-line owners group

    1,953
    712
    113
    Ouch lol
     
  11. g00se

    g00se Active Member

    268
    26
    28
    If you can dig out those part numbers.. you'd be a total ledge.

    Ive been after these parts for 2 years now. Audi Reading, as always, completley underwhelmed me with their "Computer says no" attitude.

    I even showed them the engine bay picture in my S4 handbook, and said "I'd like those please", pointing at them.. to which the reply was "your car doesnt come with them" grrr I frickin know that, that's why I want them!!!

    Then he said "they don't fit your engine".. "well clearly they do, as they are in the picture of an S4 engine bay with them on?!?"

    Again, "your car doesnt come with them" argh!!

    [​IMG]

    Anyhoo, rant over.. if you can find them, it would be much appreciated :thumbsup:

    goose
     
  12. matthew999

    matthew999 Member

    142
    6
    18
  13. mehtaman

    mehtaman Member Team Daytona s tronic saloon

    89
    2
    8
    I haven't got round to adding an Engine bay kit to my car but I did request a quote on this forum:
    >>> Click Here <<<

    I got the part numbers from another forum that was running a group buy that I just missed out on.
    They should be the correct part numbers but its would be worth double checking.

    Hope that helps :)
     
  14. Richardesty

    Richardesty loves quattro

    742
    20
    18
    All you need now is an RS6 grill to match :lmfao:
     
  15. D2NY G

    D2NY G Well-Known Member

    1,088
    132
    63
    Is this grill possibly for sale matey lol ;)
     
  16. A4_MaJiK

    A4_MaJiK Azeem

    924
    108
    43
    I've noticed there are two different covers for the PAS fluid reservoir and the screenwash bottle (i.e. on with the curved section and one which comes straight down).

    Does anybody have the part number for the one which comes straight down?
     
  17. g00se

    g00se Active Member

    268
    26
    28
    Thanks to Matthew999 & Mehtaman... Awaiting quote from Stoke Audi!

    Cheers,
    goose
     
  18. g00se

    g00se Active Member

    268
    26
    28
    hhmm - i see what you mean.. i think the curved one is for the B7 RS4 as that is where the dipstick sticks out (I think its a bit further over to the right than the B7 S4 V8)

    I'll check which one (curved or straight) i get quoted for from Stoke Audi, and will let you know

    goose
     
  19. MattUK

    MattUK Member

    97
    17
    8
    Just to resurrect an old thread... and wish I had seen this first (or listened to my mate in Audi parts) - got both the left and right covers and neither fit the 3.0 TDI. Both would need some chopping up to fit round the additional pipe work.

    2 more bits to go in the odds and sods box :)

    Parts which were ordered :

    8E0 103 927 F
    8H0 103 928

    Cheers

    Matt
     
  20. D2NY G

    D2NY G Well-Known Member

    1,088
    132
    63
    Not sure of part numbers, mad seeing an old pic tho lol, these are currently all off the car for rework :D
     
  21. Craig Cull

    Craig Cull Well-Known Member

    2,244
    918
    113
    Looks well that mate!!
     
  22. etxeondo

    etxeondo Member

    67
    2
    8
    i always thought you needed to mod the r8 cap to sit flush but also to be the right way around instead of upside down?
     
  23. Macdoon

    Macdoon Well-Known Member Team Ibis Gold Supporter Audi A4 S-line owners group

    1,953
    712
    113
    I've just picked up the engine covers and R8 oil cap, the cap definitely sits the wrong way round, apparently I need to separate the top and bottom of the cap and turn it a 1/2 turn!!
     
  24. DieselJake

    DieselJake God Mode

    2,150
    377
    83
    Are the dip stick and washer cover sprayed black, if not what are they? Love 'em!
     
  25. D2NY G

    D2NY G Well-Known Member

    1,088
    132
    63
    my r8 oil cap is modded to sit correct, also since put a Porsche coolant cap on it

    the dip stick and other caps are just sprayed black, also painted the top of the coolant bottle black too

    [​IMG]
    IMG_1998 by D2NY G Photography, on Flickr

    all been redone atm
     
  26. D2NY G

    D2NY G Well-Known Member

    1,088
    132
    63
    also big tip for anyone wanting to cover the fuel filter

    [​IMG]
    DSC_0309 [1280x768] by D2NY G Photography, on Flickr

    use a pugeot 206 suspension top cover, and cut out were the pipes go for a bloooming perfect fit

    was proper over the moon when a just randomly came across is

    that special info is free on me cheers :D
     
    CraigRE and matt_cunningham1985 like this.
  27. CraigRE

    CraigRE Active Member

    342
    90
    28
    D2ny
    How much did you cut..and where abouts

    I bought on and cut it but it doesnt look as good as yours

    Cheers
     

Share This Page